FIRESAFE / FSA is a fire-rated acrylic sealant that expands when exposed to heat, creating a fireproof and smokeproof barrier to adjacent rooms.

FIRESAFE / FSG is a graphite-based fire-rated sealant that expands when exposed to heat, creating a fireproof and smokeproof barrier to adjacent rooms.

FIRESAFE / FSB1 and / FSB2 are fire boards with an internal high-density rock wool core treated with FIRESAFE / FSP fire retardant paint on one or both sides.
FIRESAFE / FSB is intended as a fire seal for larger gaps, creating a fireproof and smokeproof barrier to adjacent rooms.

FIRESAFE / FSC is a firestop collar with a 30 mm height provided as a rolled up band with connected stainless steel links. It has a length of 2610 mm and can easily be divided into 174 sections.
FSC has an internal heat-expanding coating made from a high-quality graphite material. The roll of FSC firestop collar can easily be divided up to customise it for precise pipe diameters.
FIRESAFE / FSC expands when exposed to heat, creating a fireproof and smokeproof barrier to adjacent rooms.

FIRESAFE / FSP is a fire-rated paint based on a polymer system.
In addition to other applications, this paint is used for fire treatment of FIRESAFE / FSB fire boards FSB1 and FSB2.
FIRESAFE / FSP is also used for fireproofing cable ladders, cable trays and cables as well as pipe penetrations. This provides a fire-resistant and smoke-proof seal against adjacent spaces.

FIRESAFE / FSP forms part of the FIRESAFE / FSB fire-proofing system.
FIRESAFE / FSP can be used in combination with FIRESAFE / FSB fire boards FSB1 - FSB2 and FIRESAFE / FSA Acrylic.

FIRESAFE / FSW is a graphite-based firestop wrap provided in 10 m rolls.
FIRESAFE / FSW is used for fireproof penetration seals for flammable pipes and non-flammable pipes with flammable pipe insulation.
FIRESAFE / FSW expands when exposed to heat, creating a fireproof and smokeproof barrier to adjacent rooms.

FIRESAFE / FSD is a self-adhesive disc made of heat-expanding material.
FIRESAFE / FSD can be shaped around small ducts for a fire and smoke-proof seal to adjacent spaces.
FIRESAFE / FSD is part of the Firesafe fire sealing system.

This transparent plastic cabinet is designed to house and protect a 6 kg fire extinguisher from weather, dirt and vandalism, while keeping the extinguisher clearly visible through the transparent window. The cabinet is made of polypropylene, nylon and polycarbonate (3 mm thickness), and is resistant to flames, hydrocarbons and lubricating oils, UV radiation and extreme temperatures, with a water- and dust-tight seal. External dimensions: 630 x 335 x 240 mm (H x W x D), weight 3.2 kg. Suitable for outdoor and indoor installation at locations such as petrol stations, warehouses, hangars, airports, garages and industrial sites. Manufacturer article number: Cervinka 0104. Supplied via DAKEN/Cervinka.

This transparent plastic cabinet is designed to house and protect a 5, 9 or 12 kg fire extinguisher from weather, dirt and vandalism, while keeping the extinguisher clearly visible through the transparent window. The cabinet is made of polypropylene, nylon and polycarbonate (3 mm thickness), and is resistant to flames, hydrocarbons and lubricating oils, UV radiation and extreme temperatures, with a water- and dust-tight seal. External dimensions: 865 x 335 x 240 mm (H x W x D), weight 6.5 kg. Suitable for outdoor and indoor installation at locations such as petrol stations, warehouses, hangars, airports, garages and industrial sites. Manufacturer article number: Cervinka 0113. Supplied via DAKEN/Cervinka.

The sterile wound dressing covers wider wounds and bleeding in work environments where a stable, easy-to-apply dressing system is required. The pad is absorbent, and the self-adhesive edges keep the dressing securely in place during use.

The dressing is applied directly to the skin and covers a larger area, making it suitable for industry, workshops and other work environments where injuries may be more extensive. The product is intended for single use. The dressings are compatible with Housegard first aid stations as well as other makes.

Cederroth 4-in-1 Bloodstopper is a large, sterile universal dressing for heavy bleeding and larger wounds at the workplace. The large pad and two elastic bandages make it possible to apply an effective pressure dressing quickly – also on arms, legs and torso.

• Cederroth REF 1910, EAN 7310610019105
• Four uses: pressure dressing for heavy bleeding, protective dressing for superficial wounds, burn dressing and temporary support bandage
• Sterile pad 14 × 23 cm
• 2 disposable elastic bandages, 10 cm × 3 m
• Pictorial instructions on the pack

The bloodstopper should be easy to reach at the first aid station, especially in industry, workshops, construction and commercial kitchens. Store dry in the original packaging, and replace after use or when the expiry date has passed.

Cederroth 4-in-1 Bloodstopper Mini is a compact, sterile dressing for fast treatment of bleeding and wounds. The pad is stitched to an elastic bandage, so the dressing can be applied with one hand and give firm pressure on the wound. The small pack fits in a pocket, vehicle or personal first aid kit.

• Cederroth REF 1911
• Four uses: pressure dressing for heavy bleeding, wound dressing, burn dressing and support bandage
• Sterile pad 12 × 8 cm with non-stick wound contact layer
• Elastic viscose bandage, 3 m × 6 cm
• Pack 4 × 2.5 × 6.5 cm, 14 g, with pictorial instructions
• Shelf life 5 years from production date

Store dry at room temperature in the original packaging until use. For larger wounds and workplaces with a risk of serious cuts, Cederroth 4-in-1 Bloodstopper (REF 1910) is also recommended.

ImperLED 138 is a dust- and water-tight (IP65) combined escape-route and emergency luminaire in plastic for indoor installations in escape routes and anti-panic areas, such as car parks, warehouses and sports halls. Designed for both new builds and refurbishment. Selectable 1, 3 or 8-hour emergency-light duration via a switch, with simplified configuration between escape-route and marking-light mode. Delivered with 4 single-sided pictograms H/V/N/O; a suspended double-sided pictogram is available as a separate accessory. Optional addressable interface for elBus, potential-free, DALI or wireless. Expected LED lifetime >100,000 hours. Honeywell Life Safety AS, art. no. 138002.

UniLED 27m is a combined escape-route and emergency luminaire in plastic for indoor use, with a reading distance of up to 27 metres.

Supplied complete with 4 single-sided pictograms, and can be extended with double-sided pictogram sets or a suspended pictogram as separate accessories.

Designed for both new builds and refurbishment, with simplified configuration between escape-route and marking-light mode. Expected LED lifetime over 100,000 hours.

Honeywell Life Safety AS, art. no. 138057.

ExiLED 25m HC pictogram kit is a replaceable set of high-contrast (HC) pictograms for the Honeywell ExiLED 25m exit sign luminaire. The kit lets you change the direction shown on the luminaire – for example after refurbishment or a changed escape route – without replacing the luminaire itself.

• Honeywell part no. 138080.2
• Fits ExiLED 25m exit sign luminaire (Honeywell part no. 138087)
• 7 pictograms: 2N, 2O, HV and blank plate
• For single-sided and double-sided mounting
• High contrast (HC) for good legibility
• Viewing distance 25 m
• Ordered separately from the luminaire

The correct pictogram is essential for the exit sign to show the escape direction clearly. Check that the pictograms match the evacuation plan after changes to the building and during periodic inspection of the emergency lighting.

ExiLED 25m is an elegant marking-light luminaire in aluminium and acrylic for indoor use, suited to offices, cinemas, hotels, shopping centres, cafés and restaurants. Designed for both new builds and refurbishment. Selectable 1, 3 or 8-hour emergency-light duration via a switch, with simplified configuration between marking-light and escape-route-light mode. Optional addressable interface for elBus, potential-free, DALI or wireless. IP40, dust-tight. Reading distance 25 m. Delivered with 7 interchangeable pictograms 2N-2O-H-V-blank, for single- and double-sided mounting. Expected LED lifetime >100,000 hours. Bracket mounting for quick installation and maintenance. Honeywell Life Safety AS, art. no. 138087.

ExiLED 40m HC pictogram kit is a replaceable set of high-contrast (HC) pictograms for the Honeywell ExiLED 40m exit sign luminaire. The kit lets you change the direction shown on the luminaire – for example after refurbishment or a changed escape route – without replacing the luminaire itself.

• Honeywell part no. 138120.2
• Fits ExiLED 40m exit sign luminaire (Honeywell part no. 138126)
• 7 pictograms: 2N, 2O, HV and blank plate
• For single-sided and double-sided mounting
• High contrast (HC) for good legibility
• Viewing distance 40 m
• Ordered separately from the luminaire

The correct pictogram is essential for the exit sign to show the escape direction clearly. Check that the pictograms match the evacuation plan after changes to the building and during periodic inspection of the emergency lighting.

ExiLED 40m is an elegant marking-light luminaire in aluminium and acrylic for indoor use, suited to offices, cinemas, hotels, shopping centres, cafés and restaurants. Designed for both new builds and refurbishment. Selectable 1, 3 or 8-hour emergency-light duration via a switch, with simplified configuration between marking-light and escape-route-light mode. Optional addressable interface for elBus, potential-free, DALI or wireless. IP40, dust-tight. Reading distance 40 m. Delivered with 7 interchangeable pictograms 2N-2O-H-V-blank, for single- and double-sided mounting. Expected LED lifetime >100,000 hours. Bracket mounting for quick installation and maintenance. Honeywell Life Safety AS, art. no. 138126.

This NOHA repair kit contains the O-rings needed for servicing NOHA fire hose reel drums Model 1, 2, 3, 100 and 110, compliant with EN 671-1. The kit is used to reseal the rotating water connection on the drum during routine maintenance or after wear, helping ensure the reel remains leak-free and ready for use. Manufacturer article number: NOHA 150706. Supplied via NOHA.

Fire hose BAS 25 mm × 30 m is a semi-rigid hose for fire hose reels. The hose keeps its shape even when not pressurised, so it can be run out and used immediately – even by one person.

• Toppi ToppSafety LFH, part no. 193-TO24
• Internal/external diameter 25/32 mm, wall thickness 3.5 mm, length 30 m
• Semi-rigid hose to EN 694:2014 (type A, class 2)
• Working pressure 12 bar, burst pressure 42 bar (at 23 °C)
• Three layers: PVC inner hose, polyester reinforcement and PVC cover
• Weight 430 g/m, temperature range −20 °C to +60 °C
• Colour: black
• Phthalate-free, REACH and RoHS compliant, made in Finland
• For hose replacement on fire hose reels to EN 671-1

The hose is checked along its full length at the annual inspection to EN 671-3 and replaced in case of cracks, kinks, leakage or ageing. After a hose change the reel is pressure tested before being put back into service.

Fire hose BAS 19 mm × 30 m is a semi-rigid hose for fire hose reels. The hose keeps its shape even when not pressurised, so it can be run out and used immediately – even by one person.

• Toppi ToppSafety LFH, part no. 193-TO25
• Internal/external diameter 19/25 mm, wall thickness 3.0 mm, length 30 m
• Semi-rigid hose to EN 694:2014 (type A, class 2)
• Working pressure 12 bar, burst pressure 42 bar (at 23 °C)
• Three layers: PVC inner hose, polyester reinforcement and PVC cover
• Weight 285 g/m, temperature range −20 °C to +60 °C
• Colour: black
• Phthalate-free, REACH and RoHS compliant, made in Finland
• For hose replacement on fire hose reels to EN 671-1

The hose is checked along its full length at the annual inspection to EN 671-3 and replaced in case of cracks, kinks, leakage or ageing. After a hose change the reel is pressure tested before being put back into service.

High-visibility vest in yellow for evacuation leaders, from Reflectil (model 203). The vest makes the evacuation leader clearly visible during evacuations and drills, and is approved to EN ISO 20471:2013 class 2.

The vest is one size (approx. 73 × 68 cm), has a Velcro closure and comes in a fabric bag, so it is easy to store, for example next to the evacuation plan or in a vehicle.

Material: 100% polyester, 130 g/m². Washing: 25 times at 60 °C (ISO 6330).

High-visibility vest in orange for evacuation leaders, from Reflectil (model 203). The vest makes the evacuation leader clearly visible during evacuations and drills, and is approved to EN ISO 20471:2013 class 2.

The vest is one size (approx. 73 × 68 cm), has a Velcro closure and comes in a fabric bag, so it is easy to store, for example next to the evacuation plan or in a vehicle.

Material: 100% polyester, 130 g/m². Washing: 25 times at 60 °C (ISO 6330).

Cederroth Protection Kit protects the first aider during CPR and wound care. The kit contains a breathing mask with one-way valve, disposable gloves and cleansing wipes in a small box that fits in the first aid cabinet, kit or vehicle.

• Cederroth REF 2596
• 1 breathing mask with one-way valve (Cederroth REF 1921) – limits contact between first aider and casualty during rescue breaths
• 4 disposable gloves
• 2 hand cleansing wipes
• Box 12.5 × 6.5 × 3.5 cm with pictorial instructions
• Shelf life 5 years from production date

Keep the kit in its original packaging until use, and replace it after use or when the expiry date has passed. A protection kit next to the defibrillator or first aid station lowers the threshold for starting CPR quickly.

NOHA hose guide is the standard guide for wall-mounted NOHA fire hose reels. It guides the hose as it is pulled out, so the hose can be run out in any direction without damaging the reel or the hose. The hose guide is robust and easy to fit.

• NOHA part no. 218611
• Fits free-standing NOHA reels Ø19 and Ø25
• For hose run-out in all directions
• Keeps the nozzle at gripping height
• Painted steel – fitted to the reel bracket or wall below the reel

The hose guide is checked at the annual inspection of the hose reel to EN 671-3 and replaced if it is deformed, loose or obstructs the hose.

NOHA supply hose Ø19 mm is the flexible water connection between the valve and the reel inlet in NOHA fire hose reel cabinets. The hose has an integrated spring that keeps it stable and prevents kinking when the cabinet door and reel swing out. Supplied with hose clamps.

• NOHA part no. 218669
• Size Ø19 mm, length approx. 1.25 m (adjusted on installation)
• Black special hose with integrated anti-kink spring
• Working pressure 12 bar
• Spare part for fire hose reels to EN 671-1

The springs must face the inlet, and the door must open 180° without the hose being stretched or rubbing against the reel cover. The supply hose is included in the annual inspection and 5-year pressure test to EN 671-3 and is replaced in case of leakage, cracks or damage.

NOHA supply hose Ø25 mm is the flexible water connection between the valve and the reel inlet in NOHA fire hose reel cabinets. The hose has an integrated spring that keeps it stable and prevents kinking when the cabinet door and reel swing out. Supplied with hose clamps.

• NOHA part no. 219174
• Size Ø25 mm, length approx. 1.32 m (adjusted on installation)
• Black special hose with integrated anti-kink spring
• Working pressure 12 bar
• Spare part for fire hose reels to EN 671-1

The springs must face the inlet, and the door must open 180° without the hose being stretched or rubbing against the reel cover. The supply hose is included in the annual inspection and 5-year pressure test to EN 671-3 and is replaced in case of leakage, cracks or damage.

This accessory box is a refill for first aid stations, containing scissors, self-adhesive tape, a sling, a cleansing wipe, a self-adhesive finger dressing, a mouth-to-mouth mask and disposable gloves. It makes it easy to keep first aid stations up to date, and works with Housegard stations as well as other brands. As part of a smart refill system, it simplifies restocking and reduces waste, making it well suited to workplaces where first aid equipment needs regular maintenance to ensure supplies are always available.

NOHA REHAB frame with reel for 790×790 cabinets gives an old fire hose reel a new lease of life without any work on the wall. It fits NOHA cabinets manufactured before 2002 with internal dimensions of 790×790 mm: the old frame and door are removed, and the new frame with door and reel is fitted to the existing fixings.

• Frame 860×860×30 mm with door, painted white RAL 9010
• Reel with NOHA semi-rigid hose Ø19 mm / 30 m, black (EN 694)
• Nozzle D7, approx. 31 l/min at 2 bar
• Inlet 1", working pressure 12 bar
• CE marked to EN 671-1 (0620-CPR-6437/05)

The existing valve is checked and kept if it is in good condition. After refurbishment the hose reel follows the normal annual inspection and 5-year pressure test to EN 671-3.

NOHA REHAB frame with reel for 690×690 cabinets gives an old fire hose reel a new lease of life without any work on the wall. It fits NOHA cabinets manufactured before 2002 with internal dimensions of 690×690 mm: the old frame and door are removed, and the new frame with door and reel is fitted to the existing fixings.

• NOHA part no. 284381
• Frame 795×795×30 mm with door, painted white RAL 9010
• Reel with NOHA semi-rigid hose Ø19 mm / 30 m, black (EN 694)
• Nozzle D7, approx. 31 l/min at 2 bar
• Inlet 1", working pressure 12 bar
• CE marked to EN 671-1 (0620-CPR-6437/05)

The existing valve is checked and kept if it is in good condition. After refurbishment the hose reel follows the normal annual inspection and 5-year pressure test to EN 671-3.

NOHA REHAB cabinet reel Ø550 is a new fire hose reel fitted inside an existing cabinet where the door and frame are still in good condition. The hose reel station gets a new reel, hose and nozzle without any work on the wall or replacing the cabinet.

• NOHA part no. 284386
• Reel Ø550 mm, dimensions 550×180 mm – requires space for Ø550 and a depth of 180 mm
• NOHA semi-rigid hose Ø19 mm / 25 m (EN 694)
• Nozzle D7, approx. 31 l/min at 2 bar
• Inlet ¾" BSPM to the existing valve via supply hose
• Working pressure 12 bar, CE marked to EN 671-1 (0620-CPR-6437/05)

The existing valve is checked and kept if it is in good condition. The reel then follows the annual inspection and 5-year pressure test to EN 671-3.

UniLED double-sided suspended pictogram kit is an accessory for the Honeywell UniLED that adds a ceiling-suspended, double-sided exit sign below the luminaire. It suits large open premises, halls and long corridors where the sign must hang free to be visible over longer distances.

• Honeywell part no. 290057.11
• Fits UniLED combination luminaire (Honeywell part no. 138057)
• Double-sided suspended pictogram for ceiling-mounted luminaire
• Viewing distance 30 m
• Ordered separately from the luminaire
• Install according to the instructions supplied with the kit

A suspended sign lifts the marking above obstacles such as shelving, furniture and people, making the escape direction easier to see. Check position and pictogram after changes to the building and during periodic inspection of the emergency lighting.

UniLED 27m HC pictogram kit, single-sided is a replaceable set of four high-contrast pictograms for the Honeywell UniLED combined escape route and exit sign luminaire. The kit is used when the direction indication needs changing or the pictograms need renewing, without replacing the luminaire.

• Honeywell part no. 290091.16
• Fits UniLED combination luminaire (Honeywell part no. 138057)
• 4 pictograms for single-sided display
• High contrast (HC) for good legibility
• Viewing distance 27 m
• Ordered separately from the luminaire

UniLED is an LED-based combination luminaire for indoor use in both new builds and refurbishment. Check that the pictograms show the correct escape direction after changes to the building and during periodic inspection of the emergency lighting.

The rehabilitation kit is used to replace the hose on existing fire hose reels. The kit consists of 30 metres of Formtex Ultra Extra 19 mm hose with a pressed-on nozzle, spring and hose clamp, supplied by SVEBAB.

Formtex Ultra Extra is a form-stable and flexible woven hose with an inner tube of 100% EPDM rubber and an outer weave and monofilament of 100% polyester. The hose is highly wear-resistant, weighs only about one third of a traditional rubber or plastic hose and has low friction against surfaces, making it easy to pull around corners and through tight spaces. It has excellent ageing properties and is approved to EN 694.

Hose technical data: inner/outer diameter Ø19/25 mm, bending diameter 110 mm, burst pressure 160 bar, max working pressure 20 bar (200 mWC), weight 195 g/m.

The kit contains (SVEBAB part no.):

• Formtex Ultra Extra 19 mm hose, 30 m (FXU5 019 0 X)
• Sleeve fitting 19 mm (HKFX 480-019)
• EASY nozzle 75L, ¾" (ST575-0520)
• Spring and hose clamp (BPF Formtex)

The rehabilitation kit is used to replace the hose on existing fire hose reels. The kit consists of 30 metres of Formtex Ultra Extra 25 mm hose with a pressed-on nozzle, spring and hose clamp, supplied by SVEBAB.

Formtex Ultra Extra is a form-stable and flexible woven hose with an inner tube of 100% EPDM rubber and an outer weave and monofilament of 100% polyester. The hose is highly wear-resistant, weighs only about one third of a traditional rubber or plastic hose and has low friction against surfaces, making it easy to pull around corners and through tight spaces. It has excellent ageing properties and is approved to EN 694.

Hose technical data: inner/outer diameter Ø25/30 mm, bending diameter 120 mm, burst pressure 130 bar, max working pressure 20 bar (200 mWC), weight 225 g/m.

The kit contains (SVEBAB part no.):

• Formtex Ultra Extra 25 mm hose, 30 m (FXU5 025 0 X)
• Sleeve fitting 25 mm (HKFX 480-025)
• EASY nozzle 150L, 1" (ST550-0525)
• Spring and hose clamp (BPF Formtex)

The wound cleansing wipes are used for gentle cleaning of skin and wounds in work environments where good hygiene and easy access are important. The saline solution is sterile and intended for single use.

Each wipe is individually packed to ensure hygienic use. The product can form part of first aid routines in environments such as industry, workshops and service businesses where quick cleaning is needed.

The sterile wipes are supplied as a refill for Housegard first aid stations and are compatible with other makes.

Housegard RE:USE 6 kg powder extinguisher consists of used Housegard fire extinguishers that have been collected and refurbished to be used again. Each unit contains 6 kg of ABC powder with fire rating 43A 233B C and extinguishes fires in solid materials, flammable liquids and gases. A sustainable choice for industry, workshops, warehouses, garages, vehicles, boats and cabins.

• Part no. C-43A (GPBM 600106)
• ABC powder 6 kg
• Fire classes A, B and C, rating 43A 233B C
• Temperature range −30 °C to +60 °C
• EN 3-7, CE and Wheelmark
• Reused unit – appearance, total weight, dimensions and working pressure may vary

The powder leaves residue that can damage electronics and must be cleaned thoroughly after use. For gas fires: shut off the gas supply if it can be done safely. Details for each individual unit are given on the label and in the user instructions.

CGS PEA2CR-A is an automatic ABC powder fire sprinkler for ceiling mounting, activating at 93°C. It contains 2 kg of ABC powder suitable for fires in wood, paper, textiles, flammable liquids and chemicals, and can also be used on live electrical installations up to 1000 volts.

Typical applications: small enclosed spaces such as storage rooms, waste rooms, containers and electrical installations up to 1000V. PFAS-free.

The unit must always be refilled after activation. Refilling requires special equipment; return the unit to an authorised service workshop.

CGS PEA6CR-A is an automatic ABC powder fire sprinkler for ceiling mounting, activating at 93°C. It contains 6 kg of ABC powder suitable for fires in wood, paper, textiles, flammable liquids and chemicals, and can also be used on live electrical installations up to 1000 volts.

Typical applications: small enclosed spaces such as storage rooms, waste rooms, containers and electrical installations up to 1000V. PFAS-free.

The unit must always be refilled after activation. Refilling requires special equipment; return the unit to an authorised service workshop.

CGS PEA12CR-A is an automatic ABC powder fire sprinkler for ceiling mounting, activating at 68°C. It contains 12 kg of ABC powder suitable for fires in wood, paper, textiles, flammable liquids and chemicals, and can also be used on live electrical installations up to 1000 volts.

Typical applications: small enclosed spaces such as storage rooms, waste rooms, containers and electrical installations up to 1000V. PFAS-free.

The unit must always be refilled after activation. Refilling requires special equipment; return the unit to an authorised service workshop.

CGS PEA12CR-A is an automatic ABC powder fire sprinkler for ceiling mounting, activating at 93°C. It contains 12 kg of ABC powder suitable for fires in wood, paper, textiles, flammable liquids and chemicals, and can also be used on live electrical installations up to 1000 volts.

Typical applications: small enclosed spaces such as storage rooms, waste rooms, containers and electrical installations up to 1000V. PFAS-free.

The unit must always be refilled after activation. Refilling requires special equipment; return the unit to an authorised service workshop.

CGS PEA2CR-A is an automatic ABC powder fire sprinkler for ceiling mounting, activating at 68°C. It contains 2 kg of ABC powder suitable for fires in wood, paper, textiles, flammable liquids and chemicals, and can also be used on live electrical installations up to 1000 volts.

Typical applications: small enclosed spaces such as storage rooms, waste rooms, containers and electrical installations up to 1000V. PFAS-free.

The unit must always be refilled after activation. Refilling requires special equipment; return the unit to an authorised service workshop.

CGS PEA6CR-A is an automatic ABC powder fire sprinkler for ceiling mounting, activating at 68°C. It contains 6 kg of ABC powder suitable for fires in wood, paper, textiles, flammable liquids and chemicals, and can also be used on live electrical installations up to 1000 volts.

Typical applications: small enclosed spaces such as storage rooms, waste rooms, containers and electrical installations up to 1000V. PFAS-free.

The unit must always be refilled after activation. Refilling requires special equipment; return the unit to an authorised service workshop.

CGS WE9CR-A-30 is a 9-litre water fire extinguisher for class A fires (solid organic materials such as wood, paper and textiles) with a fire rating of 21A. The extinguishing agent is frost-protected, so the extinguisher can be used and stored down to -30 °C, for example in unheated buildings, garages and outdoors.

The extinguisher is permanently pressurised with nitrogen (12 bar) and has a pressure gauge and test valve. The cylinder is made of steel with an internal coating, and the valve is chrome-plated brass with a stainless steel handle. Discharge time approx. 28 seconds, throw range 4–6 metres.

Technical data: temperature range -30 °C to +60 °C, dimensions Ø185 × 560 mm, gross weight approx. 15.8 kg. Supplied with wall bracket.

CGS WME9CR-A is a handheld water fire extinguisher containing 9 litres of clean water, suitable for fires in class A materials such as wood, paper and textiles. Water is a clean and environmentally friendly extinguishing agent, and the extinguisher can also be used near electrical installations up to 1000 volts.

Typical applications: any environment where minimising secondary damage and cleanup is important – public spaces, hotels, accommodation, schools, offices, shops and shopping centres, and other places where a clean and environmentally friendly extinguishing agent is required.

Delivered with a wall-mounting bracket. Visual inspection of pressure gauge is the user's responsibility. Full service must be carried out every 5 years in accordance with NS 3910.

CGS 50 kg powder extinguisher trolley unit (PA50CA-A), for use where fire risk is extensive and large quantities of extinguishing agent are needed close to the risk area, e.g. fuel depots, machine halls, workshops, vehicles and offshore environments. Efficiency class A IV B C, fire class ABC. PFAS-free powder that is not classified as environmentally or health hazardous. Operating pressure 14 Bar, discharge time approx. 41 seconds, operating temperature -30°C to +60°C. Fitted with a 5 metre hose with shut-off valve for better control during extended or stepwise extinguishing. Robust wheels for quick relocation. Certified to EN 1866-1, CE marked, and Wheelmark certified for maritime use. Cylinder material: steel.

This bracket holds a 6 kg powder fire extinguisher firmly in place in a car, boat or motorhome, so it stays put on the move but is quick to grab in an emergency. It's built to handle the vibration, moisture and temperature swings that come with vehicle and marine use, and helps shield the extinguisher from knocks during transport.

Fits the following extinguisher models: PE6HR-A, PE6CR-A, PE6HR-C, PE6TEA and PE6GEB.

Firesafe PE2FR-A 2 kg powder extinguisher with ABC powder and fire rating 13A 89B C is a versatile extinguisher for fires in wood, paper and textiles, flammable liquids and gases. It can also be used on fires in electrical equipment up to 1000 V at a safety distance of at least 1 m.

• Part no. 300756 (GPBM 600276), EAN 7320896002760
• Fire rating 13A 89B C, ABC powder (SUN ABC Standard)
• Discharge time 10 s, throw range 3–5 m
• Working pressure 15 bar, nitrogen propellant, steel cylinder
• Weight 4 kg, height 367 mm, diameter 110 mm
• Temperature range −30 °C to +60 °C
• Approved to EN 3-7, CE and Wheelmark (MED MEDB00001HK)
• Supplied with wall bracket

Typical applications include industry, workshops, agriculture, transport, boats and homes. Place the extinguisher visibly and within easy reach, and in a cabinet when outdoors or in dirty environments. After fires in wood, paper and textiles, follow up with water to prevent re-ignition. Maintain in accordance with national requirements and the manufacturer's service instructions.

Firesafe PE6FR-A 6 kg powder extinguisher with ABC powder and fire rating 55A 233B C is a versatile extinguisher for fires in wood, paper and textiles, flammable liquids and gases. It can also be used on fires in electrical equipment up to 1000 V at a safety distance of at least 1 m.

• Part no. 300750 (GPBM 600277), EAN 7320896002777
• Fire rating 55A 233B C, ABC powder (SUN ABC Super)
• Discharge time 23 s, throw range 4–6 m
• Working pressure 15 bar, nitrogen propellant, steel cylinder
• Weight 9.5 kg, height 520 mm, diameter 150 mm
• Temperature range −30 °C to +60 °C
• Approved to EN 3-7, CE and Wheelmark (MED MEDB00001HJ)
• Supplied with wall bracket

Typical applications include industry, workshops, agriculture, transport, boats and homes. Place the extinguisher visibly and within easy reach, and in a cabinet when outdoors or in dirty environments. After fires in wood, paper and textiles, follow up with water to prevent re-ignition. Maintain in accordance with national requirements and the manufacturer's service instructions.

This powder fire extinguisher contains ABC powder suited to fires in wood, paper, textiles, flammable liquids and chemicals. It can also be used on live electrical installations up to 1000 volts, keeping a safety distance of at least 1 metre.

Typical applications: industry, public buildings, workshops, agriculture, shipping, offshore, transport, vehicles, leisure boats, housing, and anywhere high performance matters.

Supplied with a wall-mounting bracket and rated for storage from -30°C to +60°C. If kept outdoors or in a contaminated environment, it should be placed in a dedicated cabinet.

This foam fire extinguisher contains a PFAS-free class AB foam (Evocolit Class AB Green) suited to fires in solid materials (class A) and flammable liquids (class B). It can also be used on live electrical installations up to 1000 volts, keeping a safety distance of at least 1 metre.

Internally treated with a European quality coating, propelled by nitrogen. Working temperature 0°C to +60°C.

Typical applications: industry, public buildings, workshops, petrochemical industry, agriculture, shipping.

Firesafe WAE9FR-B is a 9-litre water fire extinguisher with a fluorine-free additive for class A fires, i.e. solid organic materials such as wood, paper and textiles. The extinguishing agent is Evocolit Class A ECO Performance – PFC free, and the extinguisher has a fire rating of 55A.

The extinguisher is pressurised with nitrogen and has a working pressure of 12 bar. The water cools the burning material while the additive improves extinguishing performance. Discharge time is approximately 47 seconds. Water-based extinguishing leaves little residue and requires less clean-up than powder.

Suitable where the fire risk mainly consists of wood, paper, textiles and other solid organic materials. Can be used on electrical installations up to 1000 V at a safety distance of at least 1 metre.

Technical data: volume 9 L, steel cylinder, temperature range 0 °C to +60 °C, dimensions (H x W) 575 x 185 mm, gross weight 14.1 kg. Approved to EN 3-7, CE and Wheelmark marked.

Housegard Pebble (SA700) is an optical smoke alarm with a design inspired by nature, created by Swedish designer Lars Wettre. Its discreet shape blends in with most homes.

The smoke alarm detects smoke using an optical detection chamber and emits an alarm signal of 85 dB at 3 metres. It has a test button and a low-battery warning. The alarm is standalone and cannot be interconnected with other alarms.

Supplied with a 9V battery (6F22) with approx. one year of battery life. The battery is replaceable, and the alarm cannot be mounted without a battery fitted. Temperature range -10 °C to +40 °C. Approved to EN 14604.

Housegard Origo is a wireless smoke alarm that combines optical smoke detection with a built-in heat sensor. Up to 30 alarms can be interconnected wirelessly (433 MHz), so all alarms sound when one of them detects smoke or heat. The pack contains 2 smoke alarms (model SA422WS-B2).

Features test and hush function, locate function and low-battery warning. Each alarm is powered by 2 × AA/LR6 alkaline batteries with approx. 1 year battery life. The batteries are replaceable and included.

Intended for residential use. Mount on the ceiling at least 0.5 m from the wall; on sloping ceilings 1 m horizontally from the ridge. Test all units after installation and weekly, vacuum the exterior at least twice a year, replace the batteries yearly and replace the alarm after 10 years. Does not replace a required fire alarm system.

Technical data: alarm level ≥ 85 dB at 3 m, temperature range +5 °C to +40 °C, dimensions Ø 130 × 35 mm per alarm. Tested to EN 14604:2005+AC:2008. 5-year limited warranty against manufacturing defects (batteries excluded).

Housegard fire blanket 120 × 120 cm is used to smother small fires, for example on a stove, in a bed, in furniture or in clothing. A fire blanket is a good supplement to a fire extinguisher and should be placed in an easily accessible location, preferably in the kitchen.

The blanket is made of glass fibre fabric with a silicone coating and is supplied in a red storage pouch for wall mounting, which allows the blanket to be pulled out quickly.

Approved to EN 1869:1997. 5-year warranty.

Housegard fire blanket 180 × 120 cm is used to smother small fires, for example on a stove, in a bed, in furniture or in clothing. A fire blanket is a good supplement to a fire extinguisher and should be placed in an easily accessible location, preferably in the kitchen.

The blanket is made of glass fibre fabric with a silicone coating and is supplied in a red storage pouch for wall mounting, which allows the blanket to be pulled out quickly.

Approved to EN 1869:1997. 5-year warranty.

UniLED double-sided pictogram cover turns the Honeywell UniLED combination luminaire into a double-sided exit sign visible from both directions. The kit suits corridors and open areas where the escape direction must be readable from both sides.

• Honeywell part no. 2992020
• Fits UniLED combination luminaire (Honeywell part no. 138057)
• 6 pictograms for double-sided display: 2 × O, 2 × N and HV
• Viewing distance 23 m (double-sided)
• Ordered separately from the luminaire

With double-sided mounting the viewing distance is shorter than single-sided, so position the luminaires so the sign is visible along the entire escape route. Check the pictograms after changes to the building and during periodic inspection of the emergency lighting.

Housegard detectable plasters 2 × 45 pcs are made for the food industry, commercial kitchens and other production where a lost plaster must not end up in the product. The blue plasters are easy to spot, and the metal strip allows them to be picked up by metal detectors.

• Part no. 611070
• 2 packs of 45 plasters (90 pcs in total)
• Blue colour for good visibility against food and raw materials
• Metal strip – detectable by metal detectors
• Material that withstands moisture and wear
• Fits Housegard first aid stations and plaster dispensers from other brands

Detectable plasters are a simple measure in HACCP and hygiene routines to prevent foreign bodies in production. Keep the first aid station stocked and replace the refill when empty.

The visible blue plasters are used in work environments where wound protection needs to be quickly identifiable through visual inspection. The blue colour makes them particularly suitable for food production, laboratories and other controlled environments where hygiene and clarity are part of established routines.

Properties and function
The plasters are made of a skin-friendly, durable and water-repellent material that stays securely in place during tasks involving movement and moisture. They are dermatologically tested and designed for environments where wound protection must hold up through long work shifts while remaining easy to spot if it comes loose.

Integration with workstations
The pack is compatible with Housegard first aid stations and other makes, making it easy to refill existing stations and ensure consistent wound care handling in the workplace.

The Firesafe Mod 1 is a freestanding fire hose reel measuring Ø600 x 175 mm, with red powder-coated side plates (RAL 3001). The reel carries a 19 mm black special hose, 30 metres long, meeting EN 694, fed through a rotating centre hub so that full pressure is maintained from the first to the last metre. Fitted with a 1" manual ball valve and an adjustable nozzle offering closed, spray and solid stream settings. Fitted with a rotational inlet allowing flexible installation orientation, plus an adjustable brake and hose guide for multi-directional deployment. CE-marked to NS-EN 671-1. Firesafe item number: 300630.

NOHA Model 3 fire hose reel in cabinet 795×795×110 mm with 19 mm / 30 m hose is a complete hose reel station for indoor use in offices, schools, hotels, hospitals and assembly buildings. The cabinet can be surface-mounted or recessed into the wall, and installation can be done by one person.

• Part no. 558040-900
• External dimensions 795×795×110 mm, reel Ø700
• NOHA black semi-rigid special hose 19 mm / 30 m (EN 694)
• 1" manual ball valve and NOHA supply hose
• Nozzle with shut-off/spray/jet, D7 approx. 31 l/min at 2 bar
• Cabinet RAL 9010 white, side plates RAL 3001 red; right-hinged, reversible
• Knock-outs for Ø35 mm pipe entry on three sides
• CE marked to EN 671-1, working pressure 12 bar

The hose reel is inspected annually and pressure tested every 5 years to EN 671-3.

NOHA Model 3 fire hose reel in cabinet 695×695×160 mm with 19 mm / 30 m hose is a complete hose reel station for indoor use in offices, schools, hotels, hospitals and assembly buildings. The cabinet can be surface-mounted or recessed into the wall, and installation can be done by one person.

• Part no. 558049-000
• External dimensions 695×695×160 mm, reel Ø600
• NOHA black semi-rigid special hose 19 mm / 30 m (EN 694)
• 1" manual ball valve and NOHA supply hose
• Nozzle with shut-off/spray/jet, D7 approx. 31 l/min at 2 bar
• Cabinet RAL 9010 white, side plates RAL 3001 red; right-hinged, reversible
• Knock-outs for Ø35 mm pipe entry on three sides
• CE marked to EN 671-1, working pressure 12 bar

The hose reel is inspected annually and pressure tested every 5 years to EN 671-3.

NOHA REHAB Complete Universal is the refurbishment solution for fire hose reel cabinets not made by NOHA. A new 860×860×40 mm frame with door, Light reel and supply hose is fitted directly to the wall over the existing frame – without removing the cabinet or any work on the wall.

• Fits third-party cabinets with internal dimensions 680×680×110 mm and external dimensions max. 800×800 mm
• Frame 860×860×40 mm with door, painted white RAL 9010
• Light reel with hose Ø19 mm / 30 m and nozzle D7 (approx. 31 l/min at 2 bar)
• Inlet 1", working pressure 12 bar
• CE marked to EN 671-1 (0620-CPR-6437/05)

The existing valve is checked and kept if it is in good condition. After installation the hose reel follows the normal annual inspection and 5-year pressure test to EN 671-3.

The CGS FFE6CR-B is a 6-litre Class F fat fire extinguisher rated 13A-75F, designed for kitchens with deep-fat fryers and cooking oils in hotels, restaurants, canteens and commercial kitchens. The foam-based agent reacts chemically with burning oil or fat to form a crust that smothers the flame by blocking oxygen access, and can also be used on Class A fires. Total weight 9.8 kg, height 520 mm, diameter 160 mm. Discharge time approximately 64 seconds, operating pressure 9 bar, throw distance 1-2 metres. Rated for use between 0°C and +60°C. Propelled by nitrogen in a steel cylinder, PFAS-free, and safe for use on electrical installations up to 1000V at a minimum distance of 1 metre. Certified to EN3, CE and Wheelmark. Manufacturer article number: 600266. Supplied via GPBM Nordic.

The CGS K2FR-A is a 2 kg carbon dioxide (CO2) fire extinguisher rated 34B, suitable for Class B fires and live electrical equipment up to 1000V at a minimum distance of 1 metre. Total weight 6.9 kg, height 565 mm, diameter 104 mm. Discharge time approximately 6.5 seconds, operating pressure 174 bar, throw distance 2-4 metres. Rated for use between -30°C and +60°C. Extinguishes without residue, minimising secondary damage, and is PFAS- and surfactant-free. Certified to EN3-7, CE and Wheelmark. Manufacturer article number: 600281. Supplied via GPBM Nordic.

Firesafe K5FR-A 5 kg CO₂ extinguisher with fire rating 89B is designed for fires in flammable liquids and electrical equipment. CO₂ extinguishes without leaving residue, making it well suited where sensitive equipment must be protected – such as server rooms, technical rooms, offices and laboratories.

• Part no. 300752 (GPBM 600282-20)
• Carbon dioxide (CO₂) 5 kg, PFAS-free
• Fire class B, rating 89B
• Discharge time 13.5 s, throw range 3–5 m
• Steel cylinder, Ø 136 × 740 mm, weight 13.8 kg
• Temperature range −30 °C to +60 °C
• EN 3-7, CE and Wheelmark
• Electrical equipment up to 1000 V at a distance of at least 1 m
• Supplied with wall bracket

CO₂ displaces oxygen – take care in small, poorly ventilated rooms, and keep hands away from the horn, which becomes extremely cold. Place the extinguisher visibly and within easy reach, and in a protective cabinet outdoors. Service and refilling must be carried out by a qualified service workshop, even when only part of the contents has been used.

The plasters are designed for work environments where the skin is exposed to water, dirt and friction. The material is water- and dirt-resistant and has strong adhesion to stay in place under demanding conditions. The plasters are used in Housegard first aid stations and other makes.

Safety
Suitable for businesses where protection must be maintained even in contact with moisture and dirt.

Salvequick plastic plasters refill (REF 6036) is a refill for the Salvequick plaster dispenser from Cederroth. Each refill contains 45 plasters in two sizes for cuts, grazes and blisters at the workplace, and the plasters are taken out one at a time – quickly and hygienically.

• Cederroth REF 6036
• 45 plasters per refill: 27 pcs 72 × 19 mm and 18 pcs 72 × 25 mm
• Perforated plastic film (polyethylene), withstands moisture and water
• Fits the Salvequick plaster dispenser
• Shelf life 5 years

Plastic plasters are suited to places where hands are often in contact with water, such as kitchens, workshops and laundries. Check the dispenser regularly and replace the refill when empty, so plasters are always available.

Housegard textile plasters 2 × 45 pcs is a refill of flexible plasters for minor cuts and grazes at the workplace. The textile material breathes and sits comfortably on the skin, even during movement and longer wear.

• Part no. 611067
• 2 packs of 45 plasters (90 pcs in total)
• Breathable, flexible textile material
• Fits Housegard first aid stations and plaster dispensers from other brands

Plasters in a wall dispenser make it easy to take one at a time without touching the others – hygienic and quick. Check the first aid station regularly and replace the refill when empty, so plasters are always available where they are needed.

Salvequick textile plasters refill (REF 6444) is a refill for the Salvequick plaster dispenser from Cederroth. Each refill contains 40 plasters in two sizes for cuts, grazes and blisters at the workplace, and the plasters are taken out one at a time – quickly and hygienically.

• Cederroth REF 6444
• 40 plasters per refill: 24 pcs 72 × 19 mm and 16 pcs 72 × 25 mm
• Flexible, breathable textile material, allergy tested
• Fits the Salvequick plaster dispenser
• Shelf life 5 years

Textile plasters follow the skin and stay on fingers and joints, even during movement. Check the dispenser regularly and replace the refill when empty, so plasters are always available.

Cederroth wall bracket for eye wash gives the eye wash bottle a fixed, visible place on the wall, so it is easy to find when seconds count. The bottle opens automatically when twisted out of the bracket, so rinsing can start immediately.

• Cederroth REF 7200
• Fits Cederroth Eye Wash 500 ml (REF 725200)
• Bottle opens automatically when removed from the bracket
• With fluorescent instruction sign
• Dimensions: W 9 × H 27 × D 7 cm

With chemicals or particles in the eye it is vital to start rinsing quickly and rinse for a long time – at least 15 minutes, holding the eye open. Place the bracket close to risk areas such as workshops, laboratories, warehouses and commercial kitchens, and always see a doctor after an eye injury.

Housegard Eye Wash 250 ml is designed for immediate rinsing of the eye in common eye incidents, for example when dust, dirt, splinters or other particles enter the eye. Starting the rinsing immediately is the most important action to reduce discomfort and the risk of injury.

Practical container for station and workplace
The 250 ml format is designed to fit the Housegard first aid station and provide an effective first response. The smaller bottle is easy to handle even in stressful situations and makes it easy to quickly start rinsing where the incident occurs.

Easy to use without preparation
The bottle is sterile and intended for single use. The ergonomic design provides a good grip and makes it easier to rinse in a controlled manner, so irritating particles are quickly flushed out of the eye.

Always keep several bottles available
In case of eye incidents, rinsing should be generous. We therefore recommend keeping extra bottles close to the station. If medical attention is needed, 1–2 bottles should be brought along to continue rinsing on the way to treatment.

Plastic fire extinguisher cabinet for 6 kg extinguishers – Premium (Daken Adamant) is a robust cabinet with a distinctive design that protects the extinguisher from dust, moisture and dirt. It is injection moulded in polypropylene with an internal seal and reinforced fixing points for secure mounting.

• Part no. 302023
• For 6 kg extinguishers with diameter Ø 150–170 mm
• Injection-moulded polypropylene
• Internal PVC seal against water and dust
• Inspection window with O-ring seal
• Double ergonomic nylon catches
• Lockable with padlock or sealable
• Nylon clamping ring and PVC spring with four attachment points
• External dimensions 310 × 611 × 247 mm, internal 247 × 551 × 204 mm, weight 3.5 kg

The cabinet suits outdoor locations, vehicle and machine halls, marinas and industry where the extinguisher must be protected yet quickly accessible. Place the cabinet visibly and signed, and check the extinguisher during routine inspection.

Plastic fire extinguisher cabinet for 6–9 kg extinguishers (Daken Regon) protects the extinguisher from dust, moisture and dirt while keeping it visible and ready for use. The cabinet is injection moulded in durable polypropylene and suits outdoor locations, agriculture, marinas, car parks and industry.

• Part no. 302014
• For 6–9 kg extinguishers with diameter Ø 170–190 mm
• Injection-moulded polypropylene
• Labyrinth system against water and dust ingress
• Inspection window with O-ring seal
• Two ergonomic catches integrated into the lid
• Lockable with padlock or sealable
• Nylon clamping ring and PVC spring with four attachment points
• External dimensions 335 × 715 × 240 mm, internal 264 × 652 × 204 mm, weight 2.7 kg

The pressure gauge can be checked through the inspection window without opening the cabinet. Place the cabinet visibly and signed, and check the extinguisher during routine inspection.

This Dual cabinet from Daken holds two 6 kg fire extinguishers side by side, protecting them from dust and moisture while keeping them ready for immediate use. The plastic housing measures 616 x 735 x 270 mm and weighs 7.4 kg empty, and has an inspection window so the extinguishers can be checked at a glance.

The mounting rings are interchangeable, so the same cabinet body is also used for the larger 9-12 kg variant.

This Dual cabinet from Daken holds two 9-12 kg fire extinguishers side by side, protecting them from dust and moisture while keeping them ready for immediate use. The plastic housing measures 616 x 735 x 270 mm and weighs 7.4 kg empty, and has an inspection window so the extinguishers can be checked at a glance.

The mounting rings are interchangeable, so the same cabinet body is also used for the smaller 6+6 kg variant.

This Dual cabinet from Daken is the fire hose version of the Dual line, protecting a hose reel or hose box from dust and moisture while keeping it visible and ready for use. The plastic housing measures 616 x 735 x 270 mm and weighs 7.0 kg empty.

It shares its housing with the Dual fire extinguisher cabinets (6+6 kg and 9-12 kg variants), just fitted out for hose storage instead.

Directo S M 3H AT is a compact evacuation luminaire from Intelight with a white PC housing and a PMMA light guide plate that spreads the LED light evenly across the sign face, giving up to 25 m sign visibility. It runs in maintained (M) mode with a built–in automatic self–test (AT), so faults are detected without manual testing.

The unit is powered from 230 VAC, draws only 3 W and gives 3 hours of autonomy from its 2xAA 2.4V 900 mAh NiCd battery pack when mains power is lost. The LED light source is rated for 50,000 hours and the colour rendering index is Ra≥80. Protection rating is IP20, for indoor use between 10°C and 40°C.

Directo S can be mounted on the surface, on a wall, recessed into the ceiling, suspended, or fitted with a flag bracket for perpendicular mounting in corridors, using the same housing across all variants.

VELLA SO 150 M 3H AT IP65 is a combined emergency and evacuation luminaire from Intelight, built with a white PC/ABS body and a PC diffuser and rated IP65 / IK07 for use in damp or exposed areas as well as ordinary indoor spaces. It can be fitted as an emergency luminaire (190 lm, 5000K, Ra≥70) or, using the included pictogram set, as a green evacuation sign showing the running‑man and directional arrows.

It runs in maintained (M) mode with automatic self‑test (AT), giving 3 hours of autonomy from its LiFePO4 2x18650 6.4V 1600 mAh battery pack. Power supply is 230 VAC 50Hz, drawing 7 W, with an LED light source rated for 50,000 hours and a sign visibility of 25 m.

VELLA SO 150 mounts on the surface, on a wall, recessed, or suspended, and is also available in one‑sided and 0–90° variants for corner or corridor installations, using the same housing across all mounting options.

The Cederroth First Aid Panel Mini is a compact wall-mounted board that keeps basic first aid supplies visible and within easy reach in workshops, offices and other workplaces.

A space-saving alternative to a full first aid cabinet, ideal where wall space is limited.

Dimensions: 25 × 40 × 5 cm (W × H × D)

Contents:

• 1 Salvequick plaster dispenser with 40 textile plasters (REF 6444)
• 45 plastic plasters (REF 6036)
• 1 Cederroth 4-in-1 Bloodstopper (REF 1910)
• 3 Cederroth 4-in-1 Mini Bloodstoppers (REF 1911)

Cederroth REF 191400.

NOHA swan neck Ø25 mm (NOHA-KS) is the connection piece between the reel outlet and the hose on NOHA fire hose reels manufactured after 2002. The swan neck is part of the NOHA KS quick-coupling system, designed for easy and secure connection, and is supplied loose for coupling to NOHA fire hose.

• NOHA part no. 217917 – Swan neck 25 mm NOHA-KS
• Fits all newer NOHA reels (manufactured after 2002)
• Material: POM (acetal)
• Temperature range 0 to +80 °C
• For hose to EN 694, approved to EN 671-1

When the swan neck is replaced, the reel must be pressure tested to EN 671-3 (5-year inspection) so that the connection still meets the functional requirements. Use only original NOHA parts to maintain the performance and conformity of the reel.

NOHA swan neck Ø19 mm (NOHA-KS) is the connection piece between the reel outlet and the hose on NOHA fire hose reels manufactured after 2002. The swan neck is part of the NOHA KS quick-coupling system, designed for easy and secure connection, and is supplied loose for coupling to NOHA fire hose.

• NOHA part no. 217921 – Swan neck 19 mm NOHA-KS
• Fits all newer NOHA reels (manufactured after 2002)
• Material: POM (acetal)
• Temperature range 0 to +80 °C
• For hose to EN 694, approved to EN 671-1

When the swan neck is replaced, the reel must be pressure tested to EN 671-3 (5-year inspection) so that the connection still meets the functional requirements. Use only original NOHA parts to maintain the performance and conformity of the reel.

NOHA white door lock for fire hose reel cabinets is a robust, easy-to-use latch that keeps the cabinet door closed but opens with a single movement, without key or tools. The lock fits NOHA hose reel cabinets from 2003 onwards (incl. Model 3) and is easy to fit and remove.

• NOHA part no. 219510
• Fits NOHA hose reel cabinets from 2003 onwards (incl. Model 3)
• Mechanical latch, opens without key or tools
• Steel, painted white RAL 9010
• Maintenance-free

In an emergency the cabinet door must open in one movement. Replace the lock if the door does not stay closed, the lock sags or opening requires force – typical findings at the annual inspection to EN 671-3.

NOHA supply hose Light 1,120 mm is the flexible water connection between the valve and the reel inlet in NOHA Model 3 cabinets 795×795. The Light version is a lightweight hose made for Model 3 and is the spare part used when the supply hose needs replacing.

• NOHA part no. 226371
• Length 1,120 mm
• Fits NOHA Model 3 cabinet 795×795 (695 cabinet: part no. 226696, 1,060 mm)
• Working pressure 12 bar; included in the 5-year pressure test
• Replace in case of kinks, cracks, leakage or ageing

When fitting, the cabinet door must open 180° without straining the hose, and the hose must not rub against the reel cover. Pressure test the reel after replacement in accordance with EN 671-3.

NOHA door lock for fire hose reel cabinets is a robust, easy-to-use latch that keeps the cabinet door closed but opens with a single movement, without key or tools. The lock fits NOHA hose reel cabinets manufactured 1991–2002 and is easy to fit and remove.

• NOHA part no. 280786
• Fits NOHA hose reel cabinets manufactured 1991–2002
• Mechanical latch, opens without key or tools
• Steel
• Maintenance-free

In an emergency the cabinet door must open in one movement. Replace the lock if the door does not stay closed, the lock sags or opening requires force – typical findings at the annual inspection to EN 671-3.

NOHA Erga inlet, complete (back plate with spindle) is a brass inlet with shaft that replaces the original composite inlet on NOHA Model 3 reels manufactured 2012–2018. The part is based on the current standard low-shaft inlet and fits the existing reel.

• NOHA part no. 284871 (Erga inlet, complete)
• Brass CW617N
• Replaces the composite inlet ("composite plate") on Model 3, 2012–2018
• Compatible with the existing reel
• Centre bolt NV19, max. 30 Nm tightening torque

Replace in case of leakage or damage to the composite inlet, or when the hose reel is refurbished. After replacement the reel is pressure tested to EN 671-3. Use original NOHA parts to maintain the reel's performance and conformity with EN 671-1.

Housegard RE:USE 6 kg powder extinguisher consists of used Housegard fire extinguishers that have been collected and refurbished to be used again. Each unit contains 6 kg of ABC powder with fire rating 55A 233B C and extinguishes fires in solid materials, flammable liquids and gases. A sustainable choice for industry, workshops, warehouses, garages, vehicles, boats and cabins.

• Part no. C-55A (GPBM 600107)
• ABC powder 6 kg
• Fire classes A, B and C, rating 55A 233B C
• Temperature range −30 °C to +60 °C
• EN 3-7, CE and Wheelmark
• Reused unit – appearance, total weight, dimensions and working pressure may vary

The powder leaves residue that can damage electronics and must be cleaned thoroughly after use. For gas fires: shut off the gas supply if it can be done safely. Details for each individual unit are given on the label and in the user instructions.

CGS FE9CR-B is a 9-litre AB-class foam fire extinguisher suitable for fires in solid materials (class A) and flammable liquids (class B), and can also be used on live electrical installations up to 1000 volts. The foam is PFAS-free.

Manufactured in quality steel with a chrome-plated brass valve, stainless steel handle and test valve for easy pressure checks. Nitrogen propellant, working temperature 0°C to +60°C.

Typical applications: industry, public buildings, workshops, petrochemical industry, agriculture, shipping, housing, offices, shops, schools.

Fire24 PE6XN 6 kg powder extinguisher is a stored-pressure extinguisher with ABC powder and fire rating 43A 233B C. It is suitable for fires in wood, paper and textiles, flammable liquids and gases, and comes ready to mount with wall bracket and hose.

• Part no. 300760 (GPBM 600225), EAN 7320896002258
• Fire rating 43A 233B C, ABC powder 6 kg
• Discharge time 17 s, throw range 3–5 m
• Working pressure 14 bar, nitrogen propellant
• Steel cylinder and brass valve
• Dimensions 182 × 480 mm, weight 9.6 kg
• Temperature range −30 °C to +60 °C
• EN 3, CE – electrical equipment up to 1000 V at a distance of at least 1 m

Mount the extinguisher visibly and within easy reach. To use: pull out the safety pin, aim the hose at the base of the fire and press the handle, keeping the escape route clear. Check regularly that the pressure gauge is in the green zone and that the pin and seal are intact, and have the extinguisher refilled by a qualified service workshop after each use.

Firesafe WAE6FR-B is a handheld water extinguisher with an additive that increases extinguishing effect in class A fires. Treated with a European quality coating on the inside. Nitrogen is used as propellant, and the extinguisher can also be used on electrical installations up to 1000V – a safety distance of at least 1 metre should be kept when extinguishing near electrical installations.

Water is a clean and environmentally friendly extinguishing agent. The additive does not contain PFAS or fluorinated surfactants. Water extinguishes by cooling and smothering the fire.

Typical applications: villas, holiday homes, apartments, hotels, hospitals, public premises, ships, cabins, shops, offices and crew vehicles, etc.

Delivered with a wall-mounting bracket, and can be stored in environments from 0°C to +60°C. Maintenance must be carried out in accordance with NS 3910 and Firesafe service instructions.

CGS LITHEX6 6 L AVD extinguisher is designed for fire suppression on lithium-ion batteries up to 500 Wh and small class A fires in materials such as wood and paper. The water in the AVD agent cools, while the vermiculite forms a protective layer over the fire.

• Part no. 300770 (GPBM 600361), EAN 7320896003613
• AVD (water and vermiculite) 6 L, PFAS-free
• Fire class A, rating 13A
• Working pressure 15 bar, nitrogen propellant, steel cylinder
• Dimensions 170 × 522 mm, gross weight 10.75 kg
• Temperature range +5 °C to +60 °C – keep frost-free
• EN 3-7, CE and Wheelmark
• Supplied with hose and wall bracket

Apply AVD from 1–2 m with sweeping movements until the cylinder is empty, and wear safety glasses – batteries can explode and eject particles. Do not approach a rapidly growing fire, and keep the escape route clear. The AVD agent is replaced every five years, and the extinguisher must be refilled by an authorised service workshop after each use.

NOHA spare reel for cabinet Ø700 is the replacement reel for NOHA Model 3 cabinets 795×795 where only the reel needs renewing. Cabinet, door and valve are kept, and the hose reel station gets a new reel with hose and nozzle.

• NOHA part no. 600667
• Reel Ø700 mm, low shaft, for Model 3 cabinet 795×795
• Hose Ø19 mm / 30 m (EN 694), with supply hose
• Nozzle D7, approx. 31 l/min at 2 bar
• Inlet ¾", working pressure 12 bar
• CE marked to EN 671-1 (0620-CPR-6437/05)

The existing valve is checked during replacement and kept if it is in good condition. The reel then follows the annual inspection and 5-year pressure test to EN 671-3.

Firesafe SA501 is a compact optical smoke alarm for homes. It detects smoke using an optical detection chamber and emits an alarm signal of at least 85 dB at a distance of 3 metres. The test button checks the electronics and alarm signal, and the hush function can temporarily silence nuisance alarms.

Intended for detached houses, terraced houses and apartments. Install at least one alarm per floor, preferably in or near bedrooms. For fastest detection, mount the smoke alarm on the ceiling at least 0.5 metres from the wall. The alarm is standalone and cannot be interconnected with other alarms.

Test the smoke alarm at least once a month and clean it with a vacuum cleaner or compressed air at least twice a year. The replaceable 9V battery lasts approximately one year. The smoke alarm should be replaced after 10 years at the latest.

Technical data: temperature range 0 °C to +40 °C, dimensions 98 × 98 × 32 mm, weight 0.150 kg. Certified to EN 14604. 5-year warranty.

Firesafe FSP SA502 is an optical smoke alarm for homes. It has a sealed 3V battery (CR123A) with approx. 10 years of battery life, so no battery replacement is needed. The alarm signal is above 85 dB at a distance of 3 metres.

The alarm features a test and hush button and warns of low battery and faults. It is standalone and cannot be interconnected with other alarms.

Mount on the ceiling in accordance with the user manual. Test the alarm weekly and after installation, and vacuum the exterior at least twice a year. Replace the entire alarm after 10 years or when the battery is depleted, and dispose of it as WEEE. Does not replace a required fire alarm system.

Technical data: temperature range 0 °C to +40 °C, operating humidity below 93 %, dimensions Ø 100 × 33.6 mm, weight 0.150 kg. Tested to EN 14604:2005+AC:2008. 5-year limited product warranty (battery excluded).

Fusible link 138 °C (Buckeye FL-280-10) is the heat detector in the Buckeye Kitchen Mister kitchen fire suppression system. When the nominal rating of 138 °C is reached, the link separates and releases the tension in the detection cable, so the system is actuated automatically and mechanically – no power required.

• Nominal temperature rating: 138 °C (280 °F)
• Maximum ambient temperature at the mounting location: 107 °C (225 °F)
• Manufacturer / type: Globe Technologies ML
• Buckeye pack model FL-280-10, part no. FL28010
• 10 fusible links per pack

The temperature rating is selected after measuring the temperature at the mounting location, so that normal cooking does not actuate the system. The link is installed in the detection cable by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

The Buckeye manual requires all fusible links to be replaced at the service, which must be carried out at least every six months. After a discharge, new links are installed before the system is put back into service.

Fusible link 182 °C (Buckeye FL-360-10) is the heat detector in the Buckeye Kitchen Mister kitchen fire suppression system. When the nominal rating of 182 °C is reached, the link separates and releases the tension in the detection cable, so the system is actuated automatically and mechanically – no power required.

• Nominal temperature rating: 182 °C (360 °F)
• Maximum ambient temperature at the mounting location: 149 °C (300 °F)
• Manufacturer / type: Globe Technologies ML
• Buckeye pack model FL-360-10, part no. FL36010
• 10 fusible links per pack

The temperature rating is selected after measuring the temperature at the mounting location, so that normal cooking does not actuate the system. The link is installed in the detection cable by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

The Buckeye manual requires all fusible links to be replaced at the service, which must be carried out at least every six months. After a discharge, new links are installed before the system is put back into service.

Fusible link 232 °C (Buckeye FL-450-10) is the heat detector in the Buckeye Kitchen Mister kitchen fire suppression system. When the nominal rating of 232 °C is reached, the link separates and releases the tension in the detection cable, so the system is actuated automatically and mechanically – no power required.

• Nominal temperature rating: 232 °C (450 °F)
• Maximum ambient temperature at the mounting location: 191 °C (375 °F)
• Manufacturer / type: Globe Technologies ML
• Buckeye pack model FL-450-10, part no. FL45010
• 10 fusible links per pack

The temperature rating is selected after measuring the temperature at the mounting location, so that normal cooking does not actuate the system. The link is installed in the detection cable by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

The Buckeye manual requires all fusible links to be replaced at the service, which must be carried out at least every six months. After a discharge, new links are installed before the system is put back into service.

Fusible link 260 °C (Buckeye FL-500-10) is the heat detector in the Buckeye Kitchen Mister kitchen fire suppression system. When the nominal rating of 260 °C is reached, the link separates and releases the tension in the detection cable, so the system is actuated automatically and mechanically – no power required.

• Nominal temperature rating: 260 °C (500 °F)
• Maximum ambient temperature at the mounting location: 221 °C (430 °F)
• Manufacturer / type: Globe Technologies ML
• Buckeye pack model FL-500-10, part no. FL50010
• 10 fusible links per pack

The temperature rating is selected after measuring the temperature at the mounting location, so that normal cooking does not actuate the system. The link is installed in the detection cable by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

The Buckeye manual requires all fusible links to be replaced at the service, which must be carried out at least every six months. After a discharge, new links are installed before the system is put back into service.

Buckeye QS-CPA mounting adapter is used to mount a corner pulley at a penetration in the kitchen hood of the Buckeye Kitchen Mister kitchen fire suppression system. The adapter is part of the Quickseal range for sealed penetrations and is selected as part of the designed cable run for the mechanical functions of the system.

• Model: QS-CPA (Quickseal)
• Adapter for a corner pulley at a hood penetration
• Hole size in the hood: 1 1/8" (approx. 29 mm)
• Provides a liquid-tight penetration as required by the manual

The adapter is used together with a corner pulley such as the Buckeye CPCT-1. Design and installation are carried out by an authorised Buckeye installer in accordance with the BFR-TM technical manual, and mounting and cable routing must allow free movement of the mechanical system.

Fixing, penetration and cable run are checked at the service, at least every six months.

Buckeye BFR-SCC-50 cable clamps hold the flexible cable sheath in place along the designed run of the Buckeye Kitchen Mister kitchen fire suppression system. The clamps are used with Buckeye Shielded Cable, for example BFR-SC-100, in the mechanical installation. The pack contains 50 clamps.

• Model: BFR-SCC-50
• Fixing clamp for cable sheath
• Fits Buckeye Shielded Cable (e.g. BFR-SC-100)
• 50 clamps per pack

The clamps anchor the sheath so that it stays in place while the cable can still move freely. Location and number of fixings are adapted to the installation according to the Buckeye BFR-TM technical manual, and mounting and function testing are carried out by an authorised Buckeye installer.

Clamps, fixings and sheath are checked at the service, at least every six months, and loose or damaged clamps are put right.

A first aid station for wound care and eye wash that brings together equipment for initial response in workplaces where order and overview matter. The station is designed for businesses where regular inspection and refilling form part of systematic HSE work.

Refill packs are clearly identified and positioned so it's immediately obvious where each item belongs, making it easy to refill the station and to see at a glance if anything is missing after use. Date marking is visible from the front to simplify checks during service and review.

Refilling requires no tools, which simplifies maintenance in workshops, warehouses, production environments and offices. Refill packs are FSC certified.

The lid has a rubber seal that protects the contents from dust and moisture indoors. The eye wash bottle is intended for heated premises where room temperature is kept at around 18–25 °C, ready for immediate use in line with applicable workplace safety requirements.

The station can be complemented with other refill types depending on the business's needs, for example environments with special hygiene requirements.

Contents:

• Sterile wound dressing
• Cooling gel compress for burns, 2 pcs
• Eye wash, 250 ml
• Cleansing wipes NaCl 0.9%, 20 pcs
• Textile plasters, 45 pcs
• Water-resistant plasters, 45 pcs
• Accessory box for the first aid station
• Wall sign "First Aid" 200 × 200 mm

Description

A first aid and burn station designed for workplaces where there is a risk of both wound injuries and burns, such as restaurants, commercial kitchens, food production and workshops. The station combines wound-care materials and burn-cooling equipment in a single unit for fast first response.

Service and maintenance

Refills are positioned so it's clear what has been used and needs restocking. Date labelling is visible from the front, making regular checks easy. Refilling requires no tools, which simplifies maintenance in workplaces where ongoing safety routines are part of daily operations. The refill products are FSC certified.

Suited to heat-risk environments

Gel pads and burn gel are designed for immediate cooling of minor burns from, for example, hot surfaces, liquids or equipment. The station contains both visible and detectable plasters, making it suitable for environments where food is handled.

The protective lid with a rubber seal protects the contents from dust and moisture indoors. A wall sign and mounting materials are included.

Contents

• Sterile wound dressing, 3 pcs
• Sterile wound dressing, large
• Gel pads for burns, 2 × 2 pcs
• Burn gel, 120 ml
• Cleansing wipes, 20 pcs
• First aid accessories
• Visible plasters, 45 pcs
• Detectable plasters, 45 pcs
• Wall sign "First Aid" 200 × 200 mm

An eye wash station designed for workplaces where dust, dirt, chips or other particles can get into the eyes. The station allows rinsing to start immediately and provides protected, clearly visible storage for the eye wash bottles.

The transparent door protects the contents from dirt while keeping the bottles visible and easily accessible. A mirror inside the station helps the user aim the rinsing correctly when quick action is needed.

The station holds two bottles of sterile 0.9% saline solution (NaCl), intended for thorough eye rinsing as well as cleaning minor wounds. In the event of an eye incident, rinsing should begin immediately and continue without interruption. Extra bottles should therefore be kept nearby so rinsing can continue during transport to a doctor. A sign is included.

Features:

• Transparent door that protects and keeps the bottles visible
• Mirror for correct rinsing
• Two 500 ml bottles of sterile 0.9% NaCl
• Sign included
• Recommendation: keep extra bottles nearby

In workplaces where minor cuts and wounds occur regularly, it's important that plasters are kept together in a fixed, clearly visible place. A wall-mounted plaster dispenser reduces the risk of plasters being kept loose in drawers or pockets and makes it easier to maintain order in daily operations.

The dispenser is used in environments such as workshops, warehouses, industry, shops, catering kitchens and other workplaces where accessibility and structure are part of systematic HSE work. A clear location means employees quickly know where to find plasters when needed.

Since the dispenser is supplied empty, its contents can be adapted to the business's needs. In food production environments this might mean detectable or traceable plasters, while other environments might use textile or water-resistant plasters. This means the same dispenser can be used across different types of workplace without being replaced.

Features:

• Bottom dispensing so you only touch the plaster being removed
• Transparent lid that protects and provides an overview
• Lockable door
• Supplied empty and filled with plasters suited to the business

Sterile wound dressings for covering minor to medium-sized injuries with a clean surface that sits securely against the skin. The absorbent pad draws in fluid, while the self-adhesive area keeps the dressing firmly in place.

Each dressing is individually packed to ensure clean handling until use, making them suitable for workplaces such as industry, workshops and service environments where wound care materials need to be readily available. The dressings are intended for single use and are compatible with Housegard first aid stations as well as other makes.

This sterile, single-use gel compress provides immediate cooling for minor burns in environments where hot surfaces, liquids or equipment are handled. Shaped to lie close to the skin for even cooling, it is applied directly to the affected area and moulds to the skin, and is often included in fixed first aid solutions in industry, commercial kitchens and workshops. As part of a smart refill system that simplifies restocking and reduces waste, it is compatible with Housegard first aid stations as well as other brands.

This sterile burn gel provides direct cooling for use in professional environments where immediate relief needs to be readily available, such as manufacturing, commercial kitchens and workshops. Supplied ready to apply straight from the bottle, its consistency stays on the skin without dripping, reduces pain and swelling, and allows even coverage of the affected area, while being intended for single use to maintain a high level of hygiene. As part of a smart refill system that simplifies restocking and reduces waste, the bottle fits Housegard first aid stations and is also compatible with other brands used in industry, kitchens and service trades.

Eye Wash 500 ml is designed to provide thorough rinsing when particles or irritants have entered the eye. The sterile saline solution (0.9% NaCl) helps effectively rinse away dust, dirt, splinters and similar contaminants.

Larger volume for longer rinsing
Some incidents require more fluid to rinse thoroughly and continue until the irritation subsides. The 500 ml format provides a generous volume well suited for situations requiring extended rinsing.

Extra bottles near the workplace
The 500 ml format is well suited as a refill and as an extra reserve bottle near the station. Since the recommendation is always to rinse generously, having several bottles available on site is a clear advantage.

Bring along for further treatment
If medical attention is needed, 1–2 bottles should be brought along to continue rinsing during transport. This helps keep the eye clean and ensures the rinsing is not unnecessarily interrupted.

Floor stand for fire extinguishers lets you place the extinguisher standing on the floor where wall mounting is not possible or desirable – for example by glass walls, in open-plan premises, shops, warehouses, exhibitions and temporary events. The stand keeps the extinguisher stable and visible, and it can be lifted straight out when needed.

• Part no. 302015 (GPBM)
• Free-standing floor stand for fire extinguishers
• Alternative to wall mounting
• Keeps the extinguisher stable and clearly visible

Place the stand where it does not obstruct escape routes or traffic, but where the extinguisher is easy to find and grab. Mark the location with a sign, and check the extinguisher during routine inspection.

The Cederroth First Aid Station is a wall-mounted unit for workplaces, combining a plaster dispenser with bandages and other everyday first aid essentials.

Dimensions: 29 × 56 × 12 cm (W × H × D)

Contents:

• 2 Cederroth 4-in-1 Bloodstoppers (REF 1910)
• 3 Cederroth 4-in-1 Mini Bloodstoppers (REF 1911)
• 1 Cederroth Burn Gel Dressing, 10×10 cm (REF 901900)
• 1 Eye & Wound Cleansing Spray, 150 ml (REF 726000)
• 1 Salvequick Wound Cleansing Wipes, 20-pack (REF 323700)
• 1 Salvequick plaster dispenser with 45 plastic plasters (REF 6036)
• 40 textile plasters (REF 6444)
• 1 Cederroth Protection Kit (REF 2596)
• First aid instructions and refill key

Cederroth REF 51011026.

Steel fire extinguisher cabinet for 6 kg extinguishers (Daken Cloè) protects the extinguisher from weather, dust and dirt while keeping it visible and ready for use. The cabinet suits outdoor locations, car parks, workshops, industry and other places where the extinguisher would otherwise be exposed.

• Part no. 302019
• For 6 kg fire extinguishers
• Electro-galvanised steel, red epoxy powder coated RAL 3000, 0.6 mm
• Magnetic latch – the lid opens quickly without a key
• Lid prepared for a security seal
• Sloping roof that sheds water
• Wall or stand mounting
• External dimensions 325 × 602 × 200 mm, weight 4.5 kg

Sealing makes it easy to see whether the cabinet has been opened. Place the cabinet clearly visible and signed, and check the extinguisher inside during routine inspection.

Steel fire extinguisher cabinet for 6 kg extinguishers (Daken Cloè) protects the extinguisher from weather, dust and dirt while keeping it visible and ready for use. The cabinet suits outdoor locations, car parks, workshops, industry and other places where the extinguisher would otherwise be exposed.

• Part no. 302022
• For 9–12 kg fire extinguishers
• Electro-galvanised steel, red epoxy powder coated RAL 3000, 0.6 mm
• Magnetic latch – the lid opens quickly without a key
• Lid prepared for a security seal
• Sloping roof that sheds water
• Wall or stand mounting
• External dimensions 325 × 802 × 250 mm, weight 5.6 kg

Sealing makes it easy to see whether the cabinet has been opened. Place the cabinet clearly visible and signed, and check the extinguisher inside during routine inspection.

The Key Link standard key safe is a solid key box mounted on the outside of the facade, giving the fire brigade fast and gentle access to the building in an emergency, without having to force open doors or windows.

The safe is made of steel and is delivered locked with a work key used during installation. Once installation is complete, the fire brigade resets the lock to its own unique code, with over 720,000 possible combinations. A built-in microswitch raises an alarm if someone tries to tamper with or open the safe without permission.

Universal wall bracket for defibrillators gives the AED a fixed and visible place, so it is easy to find and grab in an emergency. The bracket is robust and fits most AED models.

• Part no. AM1010
• Universal bracket for most AEDs
• Robust and stable wall mounting
• Dimensions: L 20 × H 15 × D 9 cm

In a cardiac arrest every minute counts. Mount the AED at gripping height in a central, well-signed location such as the entrance or reception, and register it in the national AED register. Check regularly that the status indicator shows ready and that pads and battery are within their expiry dates.

Battery for Philips HeartStart HS1 and FRx is the original lithium battery (M5070A) that fits both the HeartStart HS1 and HeartStart FRx. The battery has an installed life of approx. 4 years and capacity for approx. 200 shocks.

• Part no. AM505031 (Philips M5070A)
• Fits Philips/Laerdal HeartStart HS1 and FRx
• Lithium metal battery, non-rechargeable
• Installed life approx. 4 years, capacity approx. 200 shocks
• The AED indicates when the battery needs replacing

After a battery change the AED runs a full self-test. Replace the battery when the AED indicates it or the expiry date is reached, and dispose of used batteries as hazardous waste. Check the pads' expiry date at the same time.

Mindray BeneHeart C1A semi-automatic AED is a robust, easy-to-use defibrillator for workplaces, sports facilities, schools and public buildings. Clear voice prompts and a metronome guide the rescuer through CPR, and the AED is ready to shock in under 8 seconds from power-on.

• Part no. AM805010NO, semi-automatic (shock button)
• Adult and child mode; energy up to 360 J for adults, 10–100 J for children
• Voice guidance and CPR metronome
• IP55, drop-tested from 1.5 m, operating temperature −5 to +50 °C
• Weight 2.0 kg incl. battery, dimensions 210 × 286 × 78 mm
• Automatic self-test; Li/MnO2 battery 4200 mAh with up to 6 years standby (weekly self-test)
• Pads with 5-year shelf life

Mount the AED visibly and within easy reach, and register it in the national AED register. Keep a spare set of pads available and check the status indicator regularly.

Mindray BeneHeart C-series pads (MR62) are original single-use electrodes for the Mindray BeneHeart C1A and C2. The pads are used on both adults and children, and can be pre-connected to the AED so it is ready for use.

• Part no. AM807098 (MR62)
• Fits Mindray BeneHeart C1A (semi- and fully automatic) and C2
• For adults and children
• Self-adhesive and pre-gelled, pre-connected
• Single use – replace after each use
• Shelf life 5 years from production date

Røde Kors Førstehjelp recommends keeping two sets of pads available when buying an AED or replacing pads, so the AED can quickly be put back into service after an incident. Check the expiry date during the regular AED inspection.

Battery for Mindray BeneHeart C1A and C2 is the original lithium manganese dioxide (Li/MnO2) battery for Mindray BeneHeart C-series defibrillators. It has a capacity of 4200 mAh and long standby time, so the AED is ready when needed.

• Part no. AM808070
• Fits Mindray BeneHeart C1A and C2
• Li/MnO2, 4200 mAh, non-rechargeable
• Standby up to 6 years with weekly self-test (5 years with daily self-test)
• Up to 400 shocks at 200 J with a new battery
• Shelf life 5 years from production date

The AED tests the battery automatically and indicates when it needs replacing. Replace the battery when indicated or when expired, and dispose of used batteries as hazardous waste. Check the pads' expiry date at the same time.

The Buckeye Kitchen Mister BFR-10 is a pre-filled, pre-pressurized fire suppression cylinder with an integrated valve, designed for restaurant kitchen fire suppression systems. The BFR-10 cylinder delivers extinguishing agent through 10 flow points and uses a potassium carbonate-based wet chemical extinguishing agent, pressurized with dry nitrogen to 195 psig (1344 kPa) at 21°C (70°F). The cylinder is certified to DOT 4BW240 and is mounted using the MB-2 mounting bracket. Manufacturer article number: BFR-10. Supplied via GPBM Nordic.

The Buckeye Kitchen Mister BFR-15 is a pre-filled, pre-pressurized fire suppression cylinder with an integrated valve, designed for restaurant kitchen fire suppression systems. The BFR-15 cylinder delivers extinguishing agent through 15 flow points and uses a potassium carbonate-based wet chemical extinguishing agent, pressurized with dry nitrogen to 195 psig (1344 kPa) at 21°C (70°F). The cylinder is certified to DOT 4BW240 and is mounted using the MB-2 mounting bracket. Manufacturer article number: BFR-15. Supplied via GPBM Nordic.

The Buckeye Kitchen Mister BFR-20 is a pre-filled, pre-pressurized fire suppression cylinder with an integrated valve, designed for restaurant kitchen fire suppression systems. The BFR-20 cylinder delivers extinguishing agent through 20 flow points and uses a potassium carbonate-based wet chemical extinguishing agent, pressurized with dry nitrogen to 195 psig (1344 kPa) at 21°C (70°F). The cylinder is certified to DOT 4BW240 and is mounted using the MB-2 mounting bracket. Manufacturer article number: BFR-20. Supplied via GPBM Nordic.

Buckeye BFR-5K is a complete system package for fixed fire protection of commercial kitchens and restaurants, with a capacity of up to 5 flow points. The Kitchen Mister system discharges a wet chemical agent through fixed nozzles over cooking appliances, hood plenums and exhaust ducts. The agent cools the fire and helps prevent re-ignition of grease and oil.

• System package BFR-5K with pre-filled, pressurised BFR-5 cylinder
• Capacity: max. 5 flow points
• Agent: potassium carbonate based wet chemical
• Propellant: nitrogen, 13.44 bar (195 psi) at 21 °C
• Automatic actuation with fusible links and manual actuation – mechanical, no power required
• Operating temperature 0 to +49 °C, indoors
• Cylinder approx. 630 x 250 mm (height x diameter), approx. 19 kg, bracket MB-1
• UL 300 listed and CE marked

Nozzles, piping and actuation are tailored to the kitchen. The system is designed and installed by an authorised Buckeye installer in accordance with the BFR-TM technical manual, and the cylinder is mounted upright.

The owner inspects and records the system every month. Service is carried out at least every six months by an authorised Buckeye technician, and after a discharge the cylinder must be recharged and the system reset.

Buckeye BFR-CAP remote cylinder adapter is used when the release unit of the Buckeye Kitchen Mister kitchen fire suppression system is located separately from the agent cylinder, or when several cylinders are to be actuated together. The valve cap is fitted to the cylinder valve and connected to the release unit with copper tubing, so the cylinder is actuated pneumatically from a distance.

• Model: BFR-CAP, manufacturer part no. BFRCAP
• Valve cap for pneumatic remote actuation
• Connection to the release unit: 1/4" copper tubing
• Fitted to the cylinder valve with four supplied screws
• For multi-cylinder systems

A BFR-CAP is required on every cylinder that is actuated remotely. The gasket between the valve cap and the cylinder valve must be undamaged and correctly seated. Tubing and the number of cylinders are sized according to the Buckeye BFR-TM technical manual, and installation and function testing are carried out by an authorised Buckeye installer.

Valve cap, gasket and pneumatic connection are checked at the service, at least every six months.

Buckeye BFR-SC-100 shielded cable is stainless steel cable in a flexible sheath for the mechanical functions of the Buckeye Kitchen Mister kitchen fire suppression system. The cable connects the detection line, the mechanical gas valve or the manual pull station to the release unit, while the sheath guides and protects the cable along the run.

• Model: BFR-SC-100, Buckeye part no. BFRSC100
• Stainless steel cable, 1/16" (approx. 1.6 mm)
• Approx. 32 m (105 ft) of sheath and 64 m (210 ft) of cable in the pack
• Connection with the BFR-SCI adapter to 1/2" EMT fittings and corner pulleys

The cable run must stay within the manual's limits for length and number of bends. Installation and function testing are carried out by an authorised Buckeye installer in accordance with the BFR-TM technical manual, checking that the cable moves freely and the sheath is correctly anchored.

Cable, sheath and connections are checked at the service, at least every six months.

The Buckeye BFR-SCI-10 Shielded Cable Interface is a connector component used where the stainless steel detection cable of a Buckeye kitchen fire suppression system passes through the release mechanism or changes direction, protecting the cable from abrasion and ensuring reliable mechanical transfer of tension to the release. Supplied as a pack of 10 for installation and maintenance work. Manufacturer article number: BFR-SCI-10. Supplied via GPBM Nordic.

Pharmafiks Stretcher Bag Complete is a lightweight, foldable aluminium rescue stretcher supplied together with a wool blanket and carrying straps, packed in a convenient transport and storage bag marked "stretcher".

The stretcher weighs only 6.4kg and folds down to 990 x 120mm; unfolded it measures 1870 x 550mm. Cover is made from robust Ripstop Cordura 1000D material.

Country of origin: Norway. No PDS/SDS documentation is available for this product from the source supplier; image and description only.

Spiral spring for 19 mm fire hose (SVEBAB BPF019X) is fitted on the hose at fire hose reels and hydrant cabinets and prevents the hose from kinking or being squeezed at the connection. The spring fits 19 mm Formtex Industri Extra and Ultra Extra and is made of stainless spring steel.

• Part no. BPF019X
• For 19 mm Formtex Industri Extra and Ultra Extra
• Material: stainless spring steel EN 10270-3 1.4310
• Dimensions: length 280 mm, width 30 mm
• Weight approx. 0.078 kg

The spring keeps the hose open so that water flows freely when the hose is pulled out in different directions. It is checked at the annual inspection of the hose reel and replaced if it is deformed or damaged.

Spiral spring for 25 mm fire hose (SVEBAB BPF025UX) is fitted on the hose at fire hose reels and hydrant cabinets and prevents the hose from kinking or being squeezed at the connection. The spring fits 25 mm Formtex Ultra Extra and is made of stainless spring steel.

• Part no. BPF025UX
• For 25 mm Formtex Ultra Extra
• Material: stainless spring steel EN 10270-3 1.4310
• Dimensions: length 280 mm, width 33 mm
• Weight approx. 0.085 kg

The spring keeps the hose open so that water flows freely when the hose is pulled out in different directions. It is checked at the annual inspection of the hose reel and replaced if it is deformed or damaged.

Buckeye CPCT-1 corner pulley with compression fitting guides the stainless steel cable of the Buckeye Kitchen Mister kitchen fire suppression system wherever the cable run changes direction. The pulley is used when the cable runs in EMT conduit and can form part of the run for fusible links, the manual pull station and the mechanical gas valve.

• Model: CPCT-1 (single pulley), Buckeye part no. CP5
• Compression fitting for 1/2" EMT conduit
• For changes of direction in the mechanical cable run to the release unit
• Manufacturer pack CPCT-25 contains 25 pulleys

A corner pulley is required at every change of direction in a conduit cable installation. Pulleys and conduit are installed so that the cable moves freely, and the number of pulleys, cable length and tension follow the Buckeye BFR-TM technical manual. Installation is carried out by an authorised Buckeye installer.

Pulleys, conduit fittings and cable are checked for damage, grease build-up and obstructions at the service, at least every six months.

Pharmafiks first aid kit Industry is designed for industry, workshops and other demanding environments where cuts, burns and foreign bodies in the eye are common injuries. The kit gives quick access to equipment for wound care, burns and eye rinsing.

• Part no. FK907020, GTIN 7090012051285
• Wound dressings (4 × 12 × 12 cm and 1 × 18 × 18 cm), self-adhesive pads and gauze bandages
• Water-Jel burn dressing 10 × 10 cm (2) and Water-Jel gel 4 g (5)
• Cederroth eye and wound cleansing spray 150 ml, eye bath and wound wash water and eye bath cup
• Mouth-to-mouth mask, nitrile gloves, rescue blanket, ice pack and triangular bandage
• Plasters, scissors, tweezers, safety pins, tape and first aid booklet

The kit is assembled by Røde Kors Førstehjelp (Norwegian Red Cross First Aid) from CE-marked medical products, with a shelf life of at least 30 months from production. Keep it dry and clean and restock after each use – the kit is never better than the item with the shortest expiry date.

Pharmafiks first aid kit large is the largest kit in the range and, according to the supplier, is assembled to meet the Norwegian Labour Inspection Authority's requirements for workplaces with more than 50 employees. It has extra capacity for CPR equipment, burn treatment and eye rinsing.

• Part no. FK907025, GTIN 7090012050820
• Mouth-to-mouth masks (5) and nitrile gloves (4 packs)
• Water-Jel burn dressing 10 × 10 cm (4)
• Cederroth eye wash 500 ml (2-pack), eye bath and wound wash water and eye bath cup
• Wound dressings (4 × 12 cm and 4 × 18 × 18 cm), absorbent dressings 20 × 20 cm (3) and sterile gauze swabs
• Rescue blanket (3), triangular bandage (4), ice pack, plasters, scissors, tweezers and first aid booklet

The kit is assembled by Røde Kors Førstehjelp (Norwegian Red Cross First Aid) from CE-marked medical products, with a shelf life of at least 30 months from production. Keep it dry and clean and restock after each use – the kit is never better than the item with the shortest expiry date.

Pharmafiks first aid kit small is a compact kit for smaller offices, meeting venues, emergency vehicles and cars. It contains the essentials for wound care, minor burns and CPR, and is easy to bring to where the accident happened.

• Part no. FK907040, GTIN 7090012050608
• Self-adhesive pads 10 × 12 cm (5), wound dressings 7.5 × 12 cm (2) and gauze bandage
• Universal plasters (30), wound cleansing wipes (10) and finger bandage
• Water-Jel burn dressing 10 × 10 cm and Water-Jel gel 4 g (5)
• Mouth-to-mouth mask, nitrile gloves (2 pairs), triangular bandage, scissors, tweezers and first aid booklet
• ABS plastic case, 28.5 × 11.7 × 19.5 cm, approx. 1 kg

The kit is assembled by Røde Kors Førstehjelp (Norwegian Red Cross First Aid) from CE-marked medical products, with a shelf life of at least 30 months from production. Keep it dry and clean and restock after each use – the kit is never better than the item with the shortest expiry date.

The Buckeye FLB-1 Fusible Link Bracket Kit is a mounting bracket used to secure and position fusible links along the detection cable in Buckeye kitchen fire suppression systems. It ensures the fusible link is held at the correct location and angle above cooking appliances and ducts, so the system activates reliably when a fire raises the temperature enough to melt the link. Manufacturer article number: FLB-1. Supplied via GPBM Nordic.

Cederroth Eye Wash 500ml (2-pack) is a buffered isotonic saline solution that neutralises the eye's pH after splashes of acids or alkalis, giving faster relief than standard saline. It is 100% phosphate-free and safe to use even after contact with calcium-based substances (cement, concrete, lime).

Twist-open bottle with ergonomic eye cup for one-handed use. Shelf life 4.5 years.

Plum Eye Wash 500ml contains a sterile 0.9% sodium chloride solution for rinsing eyes after contact with dust, debris or minor irritants. The bottle has a specially designed eye cup that matches the shape of the eye for a gentle, even rinse.

Fits most Plum/Snögg wall-mounted dispensing units, making it easy to keep accessible.

Country of origin: Denmark. Artikkelnummer FM80407.

Plum Eye Wash 200ml pH Neutral is a 4.9% sterile phosphate buffer solution designed to rapidly neutralise both acids and alkalis in the eye after a chemical splash. Recommended rinsing time is 2 minutes; rinse afterwards with a standard Plum Eye Wash (0.9% NaCl) if available.

Compact, easy-to-carry 200ml bottle that fits in a belt pouch or first aid/tool box. Single-use only, CE-marked medical device per directive 93/42/EEC.

Country of origin: Denmark. Artikkelnummer FM80408.

Formtex Ultra Extra 19 mm fire hose from SVEBAB is a semi-rigid, flexible woven hose for replacing the hose on all types of fire hose reels. The hose keeps its shape without pressure, so it can be pulled out and used quickly. It weighs only about one third of a traditional rubber or plastic hose and has low friction against surfaces, making it easy to pull around corners and through tight spaces.

• Part no. 300652 (SVEBAB FXU50190X, RSK 4227079)
• Inner/outer diameter Ø19/25 mm, length 30 m
• Max working pressure 20 bar (200 mWC)
• Burst pressure 160 bar, bend diameter 110 mm
• Weight 195 g/m
• Lining of 100% EPDM rubber, outer weave and monofilament of 100% polyester
• Approved to EN 694

Formtex Ultra Extra offers high abrasion resistance and excellent ageing properties. SVEBAB sells the hose by the metre, and Firesafe supplies it in 30 metre lengths.

Formtex Ultra Extra 25 mm fire hose from SVEBAB is a semi-rigid, flexible woven hose for replacing the hose on all types of fire hose reels. The hose keeps its shape without pressure, so it can be pulled out and used quickly. It weighs only about one third of a traditional rubber or plastic hose and has low friction against surfaces, making it easy to pull around corners and through tight spaces.

• Part no. 300653 (SVEBAB FXU50250X, RSK 4227080)
• Inner/outer diameter Ø25/30 mm, length 30 m
• Max working pressure 20 bar (200 mWC)
• Burst pressure 130 bar, bend diameter 120 mm
• Weight 225 g/m
• Lining of 100% EPDM rubber, outer weave and monofilament of 100% polyester
• Approved to EN 694

Formtex Ultra Extra offers high abrasion resistance and excellent ageing properties. SVEBAB sells the hose by the metre, and Firesafe supplies it in 30 metre lengths.

Refill for first aid kit medium/emergency is a complete refill pack that makes it easy to restock the Pharmafiks first aid kit after use or when contents have expired. Everything comes in one pack, so the kit is quickly complete again.

• Part no. IP406030, GTIN 7090012050745
• Self-adhesive pads (6 × 7 cm and 10 × 12 cm), gauze bandage and elastic bandage
• Universal plasters (30), waterproof plasters (15) and wound cleansing wipes (10)
• Water-Jel burn dressing 10 × 10 cm (2) and eye bath and wound wash water
• Mouth-to-mouth mask, nitrile gloves, ice pack, triangular bandage (2), scissors, tweezers and first aid booklet
• Supplied in plastic bag/carton, approx. 0.5 kg

The refill pack is assembled by Røde Kors Førstehjelp from CE-marked medical products, with a shelf life of at least 30 months from production. Sterile products must remain in their original packaging. Check the kit regularly and restock – the kit's expiry date equals the shortest date of its contents.

Buckeye N-1HP is a blue discharge nozzle with 1 flow point for Buckeye Kitchen Mister, the fixed fire suppression system for commercial kitchens and restaurants. The nozzle distributes the wet chemical agent exactly where it is needed, over selected cooking appliances and in exhaust ducts, according to the system design.

• Nozzle type: High Proximity (N-1HP), manufacturer part no. PNZN1HP
• Design value: 1 flow point
• Connection: 3/8" NPT
• Internal strainer and attached blow-off cap that prevents clogging
• Blue identification band and stamped model designation
• Can be angled up to 30° with the N-SA swivel adapter

The nozzle is selected according to the cooking appliance to be protected. Coverage, mounting height and aiming follow the Buckeye manual, and design and installation must be carried out by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

Check every month that the blow-off cap is in place and undamaged. At the service, at least every six months, the nozzle is checked for blockage.

Buckeye N-1LP is a red discharge nozzle with 1 flow point for Buckeye Kitchen Mister, the fixed fire suppression system for commercial kitchens and restaurants. The nozzle distributes the wet chemical agent exactly where it is needed, over selected cooking appliances and in exhaust ducts, according to the system design.

• Nozzle type: Low Proximity (N-1LP), manufacturer part no. PNZN1LP
• Design value: 1 flow point
• Connection: 3/8" NPT
• Internal strainer and attached blow-off cap that prevents clogging
• Red identification band and stamped model designation
• Can be angled up to 30° with the N-SA swivel adapter

Typical applications are two- and four-burner ranges, griddles, range and griddle combinations and exhaust ducts. Design and installation must be carried out by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

Check every month that the blow-off cap is in place and undamaged. At the service, at least every six months, the nozzle is checked for blockage.

Buckeye N-2HP is a green discharge nozzle with 2 flow points for Buckeye Kitchen Mister, the fixed fire suppression system for commercial kitchens and restaurants. The nozzle distributes the wet chemical agent exactly where it is needed, over selected cooking appliances and in exhaust ducts, according to the system design.

• Nozzle type: High Proximity (N-2HP), manufacturer part no. PNZN2HP
• Design value: 2 flow points
• Connection: 3/8" NPT
• Internal strainer and attached blow-off cap that prevents clogging
• Green identification band and stamped model designation
• Can be angled up to 30° with the N-SA swivel adapter

The nozzle is selected according to the cooking appliance to be protected. Coverage, mounting height and aiming follow the Buckeye manual, and design and installation must be carried out by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

Check every month that the blow-off cap is in place and undamaged. At the service, at least every six months, the nozzle is checked for blockage.

Buckeye N-2LP is a yellow discharge nozzle with 2 flow points for Buckeye Kitchen Mister, the fixed fire suppression system for commercial kitchens and restaurants. The nozzle distributes the wet chemical agent exactly where it is needed, over selected cooking appliances and in exhaust ducts, according to the system design.

• Nozzle type: Low Proximity (N-2LP), manufacturer part no. PNZN2LP
• Design value: 2 flow points
• Connection: 3/8" NPT
• Internal strainer and attached blow-off cap that prevents clogging
• Yellow identification band and stamped model designation
• Can be angled up to 30° with the N-SA swivel adapter

The nozzle is selected according to the cooking appliance to be protected. Coverage, mounting height and aiming follow the Buckeye manual, and design and installation must be carried out by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

Check every month that the blow-off cap is in place and undamaged. At the service, at least every six months, the nozzle is checked for blockage.

Buckeye N-2W is a white discharge nozzle with 2 flow points for Buckeye Kitchen Mister, the fixed fire suppression system for commercial kitchens and restaurants. The nozzle distributes the wet chemical agent exactly where it is needed, over selected cooking appliances and in exhaust ducts, according to the system design.

• Nozzle type: Wide Angle (N-2W), manufacturer part no. PNZN2W
• Design value: 2 flow points
• Connection: 3/8" NPT
• Internal strainer and attached blow-off cap that prevents clogging
• White identification band and stamped model designation
• Can be angled up to 30° with the N-SA swivel adapter

The nozzle is selected according to the cooking appliance to be protected. Coverage, mounting height and aiming follow the Buckeye manual, and design and installation must be carried out by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

Check every month that the blow-off cap is in place and undamaged. At the service, at least every six months, the nozzle is checked for blockage.

This emergency exit sign shows the running man symbol together with an arrow pointing up and to the right. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 300 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

Emergency exit sign with running man symbol and arrow up and to the right. Photoluminescent, Class D (ISO 17398/16069) — the sign absorbs and stores light from normal room lighting and glows in the dark during a power outage. The 200 x 400 mm size gives a viewing distance of 20 metres. Aluminium with silk-screen printing and protective lacquer, in accordance with ISO 7010, DIN 67510 and NS 3926.

This emergency exit sign shows the running man symbol together with an arrow pointing to the left. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 100 x 300 mm, the sign gives a viewing distance of 10 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This emergency exit sign shows the running man symbol together with an arrow pointing to the left. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 300 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This emergency exit sign shows the running man symbol together with an arrow pointing to the left. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 400 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This emergency exit sign shows the running man symbol together with an arrow pointing to the right. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 100 x 300 mm, the sign gives a viewing distance of 10 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This emergency exit sign shows the running man symbol together with an arrow pointing to the right. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 300 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This emergency exit sign shows the running man symbol together with an arrow pointing to the right. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 400 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This emergency exit sign shows the running man symbol together with an arrow pointing down and to the right. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 100 x 300 mm, the sign gives a viewing distance of 10 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign marks the location of a fire extinguisher for quick identification in an emergency. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 150 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign marks the location of a fire extinguisher for quick identification in an emergency. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 200 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign shows a directional arrow pointing left, indicating the direction to the nearest fire extinguisher. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 200 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign shows a directional arrow pointing right, indicating the direction to the nearest fire extinguisher. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 200 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign marks the location of a fire hose reel or hose cabinet for quick identification in an emergency. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 150 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign marks the location of a fire hose reel or hose cabinet for quick identification in an emergency. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 200 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign shows a directional arrow pointing left, indicating the direction to the nearest fire hose reel. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 200 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign shows a directional arrow pointing right, indicating the direction to the nearest fire hose reel. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 200 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign marks the location of a manual fire alarm call point (break glass unit) for quick identification in an emergency. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 100 x 100 mm, the sign gives a viewing distance of 10 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign marks the location of a manual fire alarm call point (break glass unit) for quick identification in an emergency. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 150 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided plough (wing) design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a fire extinguisher. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 150 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided plough (wing) design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a fire extinguisher. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 200 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided flag design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a fire extinguisher. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 150 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided plough (wing) design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a fire hose reel. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 150 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided plough (wing) design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a fire hose reel. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 200 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided plough (wing) design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a manual fire alarm call point. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 100 x 100 mm, the sign gives a viewing distance of 10 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided plough (wing) design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a manual fire alarm call point. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 150 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign indicates that the fire extinguisher is located further inside the building. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 150 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign indicates that the fire hose reel is located further inside the building. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 150 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided flag design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a fire hose reel. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 150 x 150 mm, the sign gives a viewing distance of 15 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided flag design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a fire extinguisher. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 200 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

This sign is a double-sided flag design, mounted at a right angle to the wall so it is visible from both directions along a corridor, marking the location of a fire hose reel. It is photoluminescent (Class D, ISO 17398/16069), meaning it absorbs and stores light from normal room lighting and continues to glow in the dark if the power fails. At 200 x 200 mm, the sign gives a viewing distance of 20 metres. It is made of aluminium with silk-screen printing and a protective lacquer finish, in accordance with ISO 7010, DIN 67510 and NS 3926.

Buckeye S-Hooks (SH-100) are mechanical fastening components used in the fusible link detection line of Buckeye kitchen fire suppression systems. They secure the 1/16-inch stainless steel detection cable to fusible link brackets and other mounting points along the cable routing, helping maintain correct tension and positioning above cooking appliances and ducts. Two S-hooks are included as standard hardware in the Model FLB-1 Fusible Link Bracket Kit; this is the bulk pack of 100 for installation and maintenance work. Manufacturer article number: SH-100. Supplied via GPBM Nordic.

Handfighter EASY 25 mm nozzle from SVEBAB is a durable branch pipe for fire hose reels and hydrant cabinets with 25 mm Formtex hose. Switch easily between spray and jet, and the toothed ring produces fine droplets for effective fire fighting.

• Part no. ST550-0525 (EASY 150L 1" SN short), RSK 422 70 90
• Flow 150 l/min at 6 bar (10 mm orifice)
• Max. working pressure 16 bar
• Approved by RISE to EN 671-1 (with SVEBAB standard hose reel)
• Body and test nipple in dezincification-resistant brass, acetal grip, EPDM rubber bumper
• Length 144 mm, weight approx. 0.42 kg

The rubber bumper protects against scratches and knocks, and the test nipple makes the annual inspection and pressure test easier. The nozzle fits 25 mm Formtex hose and is suitable for general fire fighting, except for advanced smoke diving.

Handfighter EASY 19 mm nozzle from SVEBAB is a durable branch pipe for fire hose reels and hydrant cabinets with 19 mm Formtex hose. Switch easily between spray and jet, and the toothed ring produces fine droplets for effective fire fighting.

• Part no. ST575-0520 (EASY 75L ¾" SN short), RSK 422 71 00
• Flow 75 l/min at 6 bar (7 mm orifice)
• Max. working pressure 16 bar
• Approved by RISE to EN 671-1 (with SVEBAB standard hose reel)
• Body and test nipple in dezincification-resistant brass, acetal grip, EPDM rubber bumper
• Length 147 mm, weight approx. 0.44 kg

The rubber bumper protects against scratches and knocks, and the test nipple makes the annual inspection and pressure test easier. The nozzle fits 19 mm Formtex hose and is suitable for general fire fighting, except for advanced smoke diving.

Buckeye WC-116 crimp sleeves are used to make crimped connections in the stainless steel cable of the Buckeye Kitchen Mister kitchen fire suppression system. The sleeves are made of tin-plated copper and fit 1/16" (approx. 1.6 mm) cable. The pack contains 100 crimp sleeves.

• Pack model WC-116-100, Buckeye part no. WC116100
• Single sleeve: WC-116, part no. PHF10076
• Material: tin-plated copper
• For 1/16" (approx. 1.6 mm) stainless steel cable
• 100 crimp sleeves per pack

The crimp sleeves are used in the cable connections specified in the system design, for example in the fusible link detection line. Crimping, cable routing and tension follow the Buckeye BFR-TM technical manual, and installation and function testing are carried out by an authorised Buckeye installer.

Crimped connections are checked at the service, at least every six months, and damaged or incorrectly crimped sleeves are replaced.