Buckeye BFR-SC-100 shielded cable is stainless steel cable in a flexible sheath for the mechanical functions of the Buckeye Kitchen Mister kitchen fire suppression system. The cable connects the detection line, the mechanical gas valve or the manual pull station to the release unit, while the sheath guides and protects the cable along the run.

• Model: BFR-SC-100, Buckeye part no. BFRSC100
• Stainless steel cable, 1/16" (approx. 1.6 mm)
• Approx. 32 m (105 ft) of sheath and 64 m (210 ft) of cable in the pack
• Connection with the BFR-SCI adapter to 1/2" EMT fittings and corner pulleys

The cable run must stay within the manual's limits for length and number of bends. Installation and function testing are carried out by an authorised Buckeye installer in accordance with the BFR-TM technical manual, checking that the cable moves freely and the sheath is correctly anchored.

Cable, sheath and connections are checked at the service, at least every six months.

Fusible link 232 °C (Buckeye FL-450-10) is the heat detector in the Buckeye Kitchen Mister kitchen fire suppression system. When the nominal rating of 232 °C is reached, the link separates and releases the tension in the detection cable, so the system is actuated automatically and mechanically – no power required.

• Nominal temperature rating: 232 °C (450 °F)
• Maximum ambient temperature at the mounting location: 191 °C (375 °F)
• Manufacturer / type: Globe Technologies ML
• Buckeye pack model FL-450-10, part no. FL45010
• 10 fusible links per pack

The temperature rating is selected after measuring the temperature at the mounting location, so that normal cooking does not actuate the system. The link is installed in the detection cable by an authorised Buckeye installer in accordance with the BFR-TM technical manual.

The Buckeye manual requires all fusible links to be replaced at the service, which must be carried out at least every six months. After a discharge, new links are installed before the system is put back into service.

Housegard Eye Wash 250 ml is designed for immediate rinsing of the eye in common eye incidents, for example when dust, dirt, splinters or other particles enter the eye. Starting the rinsing immediately is the most important action to reduce discomfort and the risk of injury.

Practical container for station and workplace
The 250 ml format is designed to fit the Housegard first aid station and provide an effective first response. The smaller bottle is easy to handle even in stressful situations and makes it easy to quickly start rinsing where the incident occurs.

Easy to use without preparation
The bottle is sterile and intended for single use. The ergonomic design provides a good grip and makes it easier to rinse in a controlled manner, so irritating particles are quickly flushed out of the eye.

Always keep several bottles available
In case of eye incidents, rinsing should be generous. We therefore recommend keeping extra bottles close to the station. If medical attention is needed, 1–2 bottles should be brought along to continue rinsing on the way to treatment.