CGS WME9CR-A 9L Vannslokker A
CGS handheld water fire extinguisher, 9L, fire class A, rating 27A 40F.
General Information

CGS WME9CR-A is a handheld water fire extinguisher containing 9 litres of clean water, suitable for fires in class A materials such as wood, paper and textiles. Water is a clean and environmentally friendly extinguishing agent, and the extinguisher can also be used near electrical installations up to 1000 volts.

Typical applications: any environment where minimising secondary damage and cleanup is important – public spaces, hotels, accommodation, schools, offices, shops and shopping centres, and other places where a clean and environmentally friendly extinguishing agent is required.

Delivered with a wall-mounting bracket. Visual inspection of pressure gauge is the user's responsibility. Full service must be carried out every 5 years in accordance with NS 3910.

Get in touch

Other Firesafe Products

Kombiarmatur VELLA SO 150 M 3H AT IP65
Kombiarmatur VELLA SO 150 M 3H AT IP65

VELLA SO 150 M 3H AT IP65 is a combined emergency and evacuation luminaire from Intelight, built with a white PC/ABS body and a PC diffuser and rated IP65 / IK07 for use in damp or exposed areas as well as ordinary indoor spaces. It can be fitted as an emergency luminaire (190 lm, 5000K, Ra≥70) or, using the included pictogram set, as a green evacuation sign showing the running‑man and directional arrows.

It runs in maintained (M) mode with automatic self‑test (AT), giving 3 hours of autonomy from its LiFePO4 2x18650 6.4V 1600 mAh battery pack. Power supply is 230 VAC 50Hz, drawing 7 W, with an LED light source rated for 50,000 hours and a sign visibility of 25 m.

VELLA SO 150 mounts on the surface, on a wall, recessed, or suspended, and is also available in one‑sided and 0–90° variants for corner or corridor installations, using the same housing across all mounting options.

FIRESAFE EX
FIRESAFE EX

FIRESAFE EX sealant is a fire-retardant, heat-expanding graphite sealant. The sealant reacts to heat and expands at 150 °C. It expands more than 13 times its original volume after 30 min at 550 °C with 5 bar pressure. The sealant seals flammable penetrations and cavities within a few minutes.

✓ Fire resistance ≤ 120 minutes
✓ Hardening time: 1-2 mm per 24 hours, depending on thickness
✓ Paintable after 24 hours
FIRESAFE FT Acrylic
FIRESAFE FT Acrylic

FIRESAFE FT Acrylic is a heat-expanding, one-component acrylic-based joint sealant. FIRESAFE FT Acrylic expands at a temperature of approximately 180°C, to 2 times its original volume.

✓ Fire resistance ≤ 240 minutes
✓ Acoustic insulation Rw ≤ 53 dB
✓ Lifespan min. 30 years
✓ Paintable after 24 hours