FIRESAFE KL-reserve (PVC kabelhylse)
Firestop for Penetration Seals
General Information

FIRESAFE KL-reserve is for cable retraction in combination with FIRESAFE GPG MORTAR. FIRESAFE KL-reserve consists of plastic, type PVC-U according to EN 61386-21. FIRESAFE KL-reserve is closed inside with a 25 mm thick cold smoke seal made of mineral wool. The cold smoke seal is glued inside the sleeve with fire-retardant paint. On the outside of the FIRESAFE KL-reserve at each end there is a layer of heat-expanding laminate in thickness 2 mm and width 30 mm, it expands at a temperature of approx. 190ºC, to 20 times the original volume

✓ Fire resistance ≤ 240 minutes
✓ Ø32 - Ø50 x 130 mm - 300 mm
Get in touch

Other Firesafe Products

PROMASTOP-S, PROMASTOP-L
PROMASTOP-S, PROMASTOP-L

Temporary sealing is often required in construction projects. Fire-retardant cushions are installed in recesses. In the event of a fire, the cushions expand and thus ensure an effective fire separation. PROMASTOP fire cushion is a fire cushion consisting of heat-expanding material. Is quick and easy to install. Expands already at a temperature of 150C. Expansion curve: 1: 2.5 at 30 min/600C.

✓ Fire rating ≤ 120 minutes
✓ PROMASTOP-S: 320x100x40mm
✓ PROMASTOP-L: 320x200x50mm
✓ Reusable
FIRESAFE FT Board
FIRESAFE FT Board

FIRESAFE FT Board is a fireproofing system of prefabricated boards for quick and easy installation in wall and floor constructions. FIRESAFE FT Board consists of non-combustible mineral wool class A1 according to EN 13501-1 with a melting point of ≥ 1000 °C. FIRESAFE FT Board has density 160kg/m3, thickness 50 mm applied with FIRESAFE FT Coating on one or two sides of the board.
Additional products are selected according to the type of installation as shown in the installation instructions.

✓ Fire rating ≤ 240 minutes
✓ Acoustic insulation Rw ≤ 43 dB
✓ Lifespan min. 30 years
PROMASTOP B, PROMASTOP P
PROMASTOP B, PROMASTOP P

Fireblock (FB) and Fireplug (FP) consist of a soft, thermally expanding graphite material. The products are used for fireproofing penetrations in masonry/cast and plasterboard structures, both in walls and ceilings.

✓ Fire rating ≤ 180 minutes
✓ Fireblock (FB): 200 x 120 x 60 mm
✓ Fireplug (FP): Ø60 - Ø260 mm
✓ Constant against: oil, gasoline and organic solvents